| Sign In | Join Free | My infospaceinc.com |
|
| Sign In | Join Free | My infospaceinc.com |
|
| Categories | USB DVI HDMI Connectors |
|---|---|
| Detection color: | Black |
| Gender: | Female |
| Packaging Details: | SMD |
| Model Number: | TYPE-C 16P QTWT |
| Brand Name: | TYPE-C 16P QTWT |
| Description: | USB-C (USB TYPE-C) Receptacle Connector 16 Position Surface Mount, Right Angle |
| Voltage Rating: | 5V |
| Connect-Disconnect Life: | 5,000 cycles |
| Stock: | 8290 |
| Operating Temperature: | -25℃~+85℃ |
| MOQ: | 20 |
| Number of Ports: | 1 |
| Number of Contacts: | 16P |
| Delivery Time: | 1工作日 |
| Mounting Type: | Surface Mount, Right Angle |
| Connector Type: | Type-C |
| Current Rating: | 3A |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
Product Name: TYPE-C 16P QTWT
Description: This product is a TYPE-C 16-pin connector designed for various applications. It operates within a practical temperature range and is rated for DC 5V 3A.
Usage Temperature Range: -25C to +85C
Standard Atmospheric Conditions for Testing:
SHOUHAN TECHNOLOGY
Shenzhen, China
TYPE-C 16P QTWT
QTWT
PRACTICAL
| Item | Project | Test Conditions | Performance | Specification |
|---|---|---|---|---|
| Mechanical Properties | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 0.52.0 Kgf | |
| Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 0.82.0 Kgf | ||
| Terminal Strength | A static load of 0.1N/m (1kgf/cm) shall be applied to the tip of the terminal for 1 min in any direction. There shall be no damage to the terminal such as cracks, looseness or play. Electrical and mechanical characteristics shall be satisfied. | |||
| Electrical Properties | Contact Resistance | Measured at small current (100mA or less) 1000Hz. | 40m MAX | |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min to following portions after which measurement shall be made: (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | 100M MIN | ||
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min. Trip current: 0.5mA. (1) Between body and conductor (2) Between conductors not to be contact (3) Between conductors not to be when plug is inserted. | Without damage to parts arcing or breakdown etc. | ||
| Durability | Solderability Test | The top of the terminals shall be dipped 1mm in the solder bath of 2505 for 50.5 seconds. (1) Solder wetting time shall be 3 sec or less (2) The area of soldering should be over 75%. | ||
| Resistance to Soldering Heat Test (Reflow Soldering) | Preheat: Temperature on the copper foil surface should reach 180, 120s after the P.C.B entered into the soldering equipment. Tallest temperature: Temperature on the copper foil surface should reach the peak temperature of 2605 with in 20 seconds. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | ||
| Resistance to Soldering Heat Test (Soldering Iron Method) | Bit temperature 3305. Application time of soldering iron 30.5 sec. However, excessive pressure shall not be applied to the terminal. | Without deformation of case or excessive looseness of terminals. Electrical characteristics shall be satisfied. | ||
| Humidity Test | The jack shall be stored at a temperature of 402 and a humidity of 90% to 96% for 96 Hr, then the jack shall be maintained at standard atmospheric condition for 1 Hr for other procedures. | |||
| Heat Test | The jack shall be stored at a temperature of 702 for 96 hours, and then it shall be subjected to the controlled recovery measurement. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | ||
| Cold Test | The jack shall be stored at a temperature of -253 for 96 hours and then it shall be subjected to the controlled recovery conditions for 1 hour after which. | There shall be no damage on appearance. Mechanical and electrical characteristics shall be satisfied. | ||
| Life Test (Without Load) | Connection and disconnection shall be made with the mating plugs and jacks for 5000 cycles at a speed of 10 to 25 cycles/min. | |||
| Life Test (With Load) | At rating condition (non-inductive load). Connection and disconnection shall be made 5000 cycles at a speed 10 to 20 cycles / min. (1) Contact resistance shall be 0.1 (2) Disconnection force shall be 0.8 to 2.0N (3) Mechanical and electrical characteristics shall be satisfied. | |||
| Temperature Cycling Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall return to room ambient condition for 30 minutes. | There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 100VAC/min (between terminals). | ||
| Cold & Heat Shock Test | The jack shall be subjected to 5 cycles of the following conditions, and then shall return to room ambient condition for 30 minutes. | There shall be no deformation or cracks in molded part. Insertion & Extraction Force: 3 to 25N. Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M. Dielectric Withstanding Voltage: 500VAC/min (between terminals). |
|
