| Sign In | Join Free | My infospaceinc.com |
|
| Sign In | Join Free | My infospaceinc.com |
|
| Categories | USB DVI HDMI Connectors |
|---|---|
| Brand Name: | TYPE-C 24P QT |
| Stock: | 9371 |
| Operating Temperature: | -30℃~+80℃ |
| Gender: | Female |
| Mounting Type: | Surface Mount, Right Angle |
| Packaging Details: | SMD |
| Number of Ports: | 1 |
| Description: | USB-C (USB TYPE-C) Receptacle Connector 24 Position Surface Mount, Right Angle |
| Current Rating: | 3A |
| Detection color: | Black |
| Connector Type: | Type-C |
| Delivery Time: | 1工作日 |
| Number of Contacts: | 24P |
| Connect-Disconnect Life: | 10,000 Cycles |
| MOQ: | 20 |
| Model Number: | TYPE-C 24P QT |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
Project: TYPE-C
Part No: TYPE-C 24P QT
Material Code:
Rating: DC 20V 3A
Usage Temperature Range: -30~80C
Standard Atmospheric Conditions for Testing:
Temperature: 5 to 35
Humidity: 45% to 85%
Pressure: 86Kpa to 106Kpa
SHOUHAN TECHNOLOGY
Shenzhen, China
Tel: 0755-27597601
Fax: 0755-27597491
| Item | Test Conditions | Performance | |||
|---|---|---|---|---|---|
| MECHANICAL | CONNECTION FORCE () | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | 3.57kgf | 3.57kgf | |
| DISCONNECTION FORCE () | MEASUREMENT SHALL BE MADE AFTER CONNECTING AND DISCONNECTING USING STANDARD PLUG GAUGE 3 TIMES | 0.8kgf | 0.8kgf | ||
| TERMINAL STRENGTH () | A STATIC LOAD OF 0.1N/m(1kgf/cm)SHALL BE APPLIED TO THE TIP OF THE TERMINAL FOR 1 MIN IN ANY DIRECTION | THERE SHALL BE NO DAMAGE TO THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY ELECTRICAL ,AND MECHANICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| ELECTRICAL | CONTACT RESISTANCE () | MEASURED AT SMALL CURRENT 100m A OR LESS 1000Hz | 30m | 30m | |
| INSULATION RESISTANCE () | APPLY A VOLTAGE OF 250V DC FOR 1 MIN TO FOLLOWING PORTIONS | 100M | 100M | ||
| DIELECTRIC STRENGTH () | AC 250V ims(50~60Hz)FOR 1 MIN TRIP CURRENT:0.5mA | WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC | |||
| DURABILITY | SOLDERA-BILITY TEST () | THE TOP OF THE TERMINALS SHALL BE DIPPED 1mm IN THE SOLDER BATH OF 2505 FOR 50.5 SECONDS | (1) SOLDER WETTING TIME SHALL BE 3 SEC OR LESS (2) THE AREA OF SOLDERING SHOULD BE OVER 75% | (1) 3 (2) 75% | |
| RESISTANCE TO SOLDERING HEAT TEST () - REFLOW SOLDERING | PREHEAT:180.120s, TALLEST TEMPERATURE:2605 WITHIN 20 SECONDS | WITHOUT DEFOR MATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| RESISTANCE TO SOLDERING HEAT TEST () - SOLDERING IRON METHOD | BIT TEMPERATURE 3305 APPLICATION TIME 30.5 SEC | WITHOUT DEFORMATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| HUMIDITY TEST () | 402 AND 90%TO 96% FOR 96 Hr, THEN 1 Hr AT STANDARD ATMOSPHERIC CONDITION | THERE SHALL BE NO DAMAGE ON APPEARANCE MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| HEAT TEST () | 702 FOR 96 HOURS, THEN 1 Hr AT ROOM TEMPERATURE | THERE SHALL BE NO DAMAGE ON APPEARANCE MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| COLD TEST () | -253 FOR 96 HOURS, THEN 1 Hr AT ROOM TEMPERATURE | THERE SHALL BE NO DAMAGE ON APPEARANCE MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| LIFE TEST () - WITHOUT LOAD | CONNECTION AND DISCONNECTION SHALL BE MADE FOR 10000 CYCLES AT A SPEED OF 10 TO 25 CYCLES/MIN | (1) CONTACT RESISTANCE SHALL BE 0.1 (2) DISCONNECTION FORCE SHALL BE 0.8 TO 2.0N (3) MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | (1) 0.1 (2) 0.8~2.0N (3) :, | ||
| LIFE TEST () - LOAD | CONNECTION AND DISCONNECTION SHALL BE MADE 10000 CYCLES AT A SPEED 10 TO 20 CYCLES / MIN (AT RATING CONDITION, NON-INDUCTIVE LOAD) | MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | |||
| TEMPARATURE CYCLINGTEST () | 5 CYCLES OF SPECIFIED CONDITIONS, THEN 30 MINUTES AT ROOM AMBIENT CONDITION | NO DEFORMATION OR CRACKS. INSERTION EXTRACTION FORCE:3 TO 20N. CONTACT RESISTANCE:MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 100VAC/MIN(BETWEEN TERMINALS) | .3N 20N.30m.100 M.100VAC | ||
| COLD&HEAT SHOCK TEST () | 5 CYCLES OF SPECIFIED CONDITIONS, THEN 30 MINUTES AT ROOM AMBIENT CONDITION | NO DEFORMATION OR CRACKS. INSERTION EXTRACTION FORCE:3 TO 25N. CONTACT RESISTANCE:MAX.30M. INSULATION RESISTANCE: MIN.100 M. DIELECTRIC WITHSTANDING VOLTAGE: 500VAC/MIN(BETWEEN TERMINALS) | .3N 25N.30m.100 M.500VAC |
|
