| C702A (J-1) | Landing Contact Full Smart Card Connectors | Push Only, Push-Push, Push-Pull, PUSHMATIC | ISO, AFNOR | < 100 m | < 200 m | > 109 | 500VAC 1 min | -25C to 85C | Push Only/Push-Push/Push-Pull: 5 x 105 Cycles; PUSHMATIC: 3 x 105 Cycles | Rugged construction, Landing contacts, PUSHMATIC with Locking
Detector/Shutter options |
| C702F (J-6) | PCB Mount card reader with stationery contacts | Stationery Contacts | ISO, AFNOR | < 35 m | < 70 m | > 109 | 500VAC 1 min | -25C to 85C | 3 x 105 Cycles | Mechanism lands Smart Card onto contacts, Short card insertion
depth |
| C705A (J-5) | Disk Drive Slot Full Smart Card Reader | Push-Pull | ISO | N/A | N/A | N/A | N/A | N/A | N/A | Mounts into Disk Drive housing for PC applications |
| C702E (J-5) | Wiping Contact Full Smart Card Connectors | Various (e.g., EMV, SC, CG, SM, DD, DP, DT, SMT) | ISO, AFNOR, EMV | < 30 m | < 50 m | > 109 | 500VAC 1 min | -25C to 70C | 105 Cycles | DIP solder or SMT, Self-cleaning switch, Special contact to
minimize card scratching |
| C702D (J-4) | Super-flat Landing Contact Full Smart Card Connectors | Push-Pull, Push-Lift, Snap-in (Board Locks) | ISO, EMV | < 30 m | < 40 m | > 109 | 500VAC 1 min | -25C to 65C | 3 x 105 Cycles | Miniaturization, Chip side up insertion, Debris egress, Dip Solder
or FFC termination |
| C702B (J-2) | PUSHMATIC II Auto-Eject Landing Contact Full Smart Card Reader | PUSHMATIC II (Auto-Eject) | ISO | < 100 m | < 200 m | > 109 | 500VAC 1 min | -25C to 70C | 3 x 105 Cycles | Smaller than PUSHMATIC, Anti-vandal features, Card accessible
during power failure, Debris slot |
| C702C LP | PUSHMATIC Auto-Eject Landing Contact Full Smart Card Reader (Low
Profile) | PUSHMATIC (Auto-Eject) | ISO | < 100 m | < 200 m | > 109 | 500VAC 1 min | -25C to 70C | 3 x 105 Cycles | Low profile for restricted spaces, Removable housing bottom for
debris slot, Landing self-cleaning contacts |