| MULTI-BEAM XLE | Hot Swappable Power Supplies (500W5KW), Cable Power | Up to 75 A* (6-beam power contact), 25A (low power contact), Up to
50 Amps (Cable Receptacles) | 6 beam power contact, low power contact, slim guide sockets, vented
housing, hot-plug capable, X, Y, Z float mount, blind-mate
connectors, modular design, Panel Mount, Slide-to-Lock and
Squeeze-to-Release configurations | 6450830-2, 6450850-2 (Connector), te.com/products/multibeamxle |
| FLATPAQ | Hot Swappable Power Supplies (500W5KW) | 32 Amps* | CROWN BAND power contacts, true hot-plug power contacts, versatile
modular design, solder and compliant press-fit termination, active
guide pins | 6646597-1, 6646722-1 |
| MINIPAK HDL | Hot Swappable Power Supplies (500W5KW) | Up to 40 Amps* | High-density, low profile, power/signal, blind-mate connector,
reduced airflow impedance, hot-pluggable power supplies, >150
amps per linear inch | 2-1926732-5, 2-1926733-5, 1926845-6, te.com/products/minipakhdl |
| Battery Interconnects | Rechargeable Batteries (for portable/hand-held electronic devices) | 7 Amps/single contact at 30 T-Rise | Choice of right angle or vertical mount headers, left, right or
keyless polarization, 5 mm pitch headers | 1827684-1, 1827654-1, 1-1123688-7, 6123978-1, 120591-1, 5787430-1,
5787441-1 |
| Universal Power Module (UPM) | Backplanes | Standard 10 amp, High current 16 Amp | Standard, high current, slim, low profile varieties, 2 performance
levels, true hot-plug contacts, high reliability (up to 250
cycles), right angle, vertical, coplanar and mezzanine
configurations | 1903977-1 (Slim UPM), 1645498-2 (Vertical Plug), 5646954-2 (R/A
Plug), te.com/products/upm |
| MULTIGIG RT | Backplanes | 20 Amp | 2 mm backplane connectors, three contact mating lengths (1.5 mm
sequence levels), 1 and 2 row versions, true hot-plug contacts | 1-1410271-1 (Plug), 1410270-2 (Receptacle) |
| ICCON | Backplanes, Board-to-board, boardto-busbar, and wire-to-board | 35A | With and without locking feature, slimline version (30% smaller
footprint), durable, quick connect/disconnect function | 6643274-1 (Vertical Pin), 6643228-1 (R/A Pin), 6643220-1 (SLIMLINE
Socket), te.com/products/iccon |
| MINIPAK HDE | Backplanes | 18 Amps per contact, over 250 Amps/linear inch | High current density, two levels of contact sequencing
(mate-first-break-last operation) | 1926226-1 (2x6), 1926229-1 (2x9), te.com/products/minipakhde |
| Stacked ICCON | Backplanes | Up to 200 Amps per inch | Very High Current Density, occupies less PCB edge space, right
angle connector, ground pin, power pin and mate-first-break-last
pin options | 2085181-1 (R/A Socket), 1766663-1 (Vertical Pin) |
| ET POWER | Cable Power, Cable-to-PCB | Up to 35 Amps | Low profile (< 8 mm above PCB), end-to-end stackability,
positive latch retention, right angle and vertical mounts | te.com/products/etpower |
| RAPID LOCK | Cable Power, Bus Bar | 50-250 Amps | BusBar Quick Connect/Disconnect, locking feature retains each
contact to mating pin, no installation tools required, fast
replacement for power lugs | te.com/products/rapidlock |
| High Current Universal MATE-N-LOK II | Cable Power | Up to 35 Amps | 2-15 circuit sizes, free hanging, panel mount, or wire-to-board,
Louvertac band and screw machined contacts, no extraction tools
required | te.com/products/universalmatenlok |
| AMP Power Series | Cable Power | 15-275 Amps (300MCM-0 AWG) | Single & 2 pole, rugged contact design, open barrel contacts,
automatic and semi-automatic machine termination, compatible with
industry alternate standard versions | te.com/products/amppowerseries |
| Wave Crimp Flat Cable | Cable Power | 40-110 Amps | Flat cable, dissipates heat better, no stripping required, reliable
low resistance gas tight interface, lower operating temperature,
easily formed | te.com/products/wavecrimp |
| Z1 Power Connector | Industry Standards | N/A | Advanced TCA | 1766500-1 |
| MINIPAK HD Guide Hardware | Industry Standards | N/A | PICMG MicroTCA.0, VITA 41.0 VXS, VITA 46.0 VPX | 1-1469373-1, 1469920-1, 1410465-1, 1410956-1, 6450843-6 |
