| Ratings |
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A (AC/DC, 50Hz virtual value) | |
| Ambient Temperature Range | -45 to +85 | |
| Electrical Performance |
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent
terminals or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1
minute between adjacent terminals or ground. |
| Mechanical Performance |
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC (0.3mm thick) at 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC (0.3mm thick) at 253mm/minute. |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal parallel at 253mm/minute. |
| Environmental Performance and Others |
| Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | 20 cycles at a speed rate of < 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration Resistance | Discontinuity 1 ms MAX. Appearance: No Damage. | Amplitude: 1.5mm P-P; Frequency: 10-55-10Hz/min; Duration: 2 hours
in each X, Y, Z axes; under DC 1mA. |
| Shock Resistance | Discontinuity 1 ms MAX. Appearance: No Damage. | 490m/s {50G}, 3 strokes in each X, Y, Z axes; under DC 1mA. |
| Heat Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity Resistance | Insulation Resistance 20 M MIN. Appearance: No Damage. | 402, 90-95% RH, 96 hours, then measure within 0.5 hours at room
temperature. |
| Temperature Cycling | Contact Resistance 60 m MAX. | 5 cycles of: 30 min at -452, 10-15 min at room temp; 30 min at 852,
10-15 min at room temp. |
| Salt Spray Resistance | Contact Resistance 60 m MAX. Appearance: No Damage or Corrosion. | 484 hours exposure to 51% salt spray solution at 352. Wash with
room temp water after test, then dry. |
| SO2 Gas Resistance | Contact Resistance 60 m MAX. Appearance: No Damage. | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance 60 m MAX. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia
solution. |
| Solderability | Solder Wetting 95% | Soldering Time: 20.5 sec. Soldering Temperature: 2355 at 0.2 mm
from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage or Deformation. | Soldering Time: 50.5 sec. Soldering Temperature: 2605 at 0.2 mm
from terminal tip. |
| Available Part Numbers: | AFC01-S**FCC-00 (Tube packaging, available for small quantities)
AFC01-S**FCA-00 (Reel packaging, recommended for bulk orders) | |
