| Material - Core | LCP+30%G.F UL94V-0 | |
| Material - Terminal | High Conductivity Copper C7025, T=0.15mm; Nickel Base 50U" MIN,
Gold Plated Contact Area (AU 1u"), Gold Plated Solder Area | |
| Material - Housing | SUS304, T=0.30mm; Nickel Plated Surface 50U" MIN | |
| Material - Middle Clamp | SUS301, T=0.15mm | |
| Rated Current | 5A | |
| Contact Resistance | 40m MAX (Initial), 50m MAX (After Test) | Measured at small current (100mA) at 1000Hz |
| Insulation Resistance | 100M MIN | Applied 100V DC for 1 min |
| Withstand Voltage | 100V AC RMS (50-60Hz) for 1 min | Trip Current: 0.5mA |
| Insertion Force | 5-20N | Measured after 3 cycles of connecting/disconnecting with standard
plug gauge |
| Extraction Force | 8-20N | Measured after 3 cycles of connecting/disconnecting with standard
plug gauge |
| Durability | 10000 Cycles | Standard conditions (No load, 10-25 cycles/min; Loaded, 10-20
cycles/min) |
| High Temperature Resistance | SMT Reflow Soldering (Peak 2605 for 20 sec) | No blistering, melting, discoloration, or warping beyond tolerance. |
| Solderability Test | Solder wetting area > 95% | Terminal dipped 1mm in solder bath at 2505 for 50.5 sec. Solder
wetting time 3 sec. |
| Resistance to Soldering Heat Test | No deformation or excessive looseness. Electrical characteristics
satisfied. | SMT Reflow Soldering (Peak 2605) or Soldering Iron Method (3305 for
30.5 sec) |
| Humidity Test | Appearance normal, mechanical and electrical characteristics
satisfied. | Stored at 402, 90%-96% RH for 96 Hr, then 1 Hr at standard
conditions. |
| Heat Test | Appearance normal, mechanical and electrical characteristics
satisfied. | Stored at 702 for 96 Hr, then 1 Hr at room temperature. |
| Cold Test | Appearance normal, mechanical and electrical characteristics
satisfied. | Stored at -253 for 96 Hr, then 1 Hr at room temperature. |
| Temperature Cycling Test | No deformation or cracks. Insertion/Extraction Force: 3-20N.
Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M.
Dielectric Withstanding Voltage: 100VAC (between terminals). | 5 cycles as per specified temperature profile. |
| Cold & Heat Shock Test | No deformation or cracks. Insertion/Extraction Force: 3-25N.
Contact Resistance: Max. 30m. Insulation Resistance: Min. 100 M.
Dielectric Withstanding Voltage: 500VAC (between terminals). | 5 cycles as per specified temperature profile. |
| Working Temperature | -30 to +80 | |
| Salt Spray Test | 48H MIN | |
