Product Details
Company Profile

ABB PM554-TP-ETH 1SAP120600R0071 AC500-eCo Processor Module with Ethernet

Engineering Data

Technical Specifications

Core specifications are shown first; extended engineering data is folded below.

Product type	AC500-eCo processor module
Part number	1SAP120600R0071
ABB type designation	PM554-TP-ETH
Program memory	128 kB Flash EPROM
Digital inputs	8
Digital outputs	6, transistor type
Supply voltage	24 V DC
Maximum current consumption	190 mA
Typical current consumption	70 mA
Maximum power dissipation	3.3 W
Onboard communication	Ethernet; COM1 RS-485
COM1 transmission rate	Configurable from 1.2 to 187.5 kBit/s
COM1 connector	9-pin D-sub female connector
Maximum AC500-eCo I/O module expansion	10 I/O modules

Show extended technical data

Data memory	VAR data 10 kB; VAR_RETAIN data 1 kB; %RB data 1 kB; %MB data 2 kB for PM554 types
Data buffering	Flash memory
Real-time clock	Optional
Battery indication	Warning
Programming languages	IL, FBD, LD, SFC, ST, CFC
Cycle time / 1000 instructions	Binary 0.08 ms; Word 0.1 ms; Floating point 1.2 ms
Program execution	Cyclic; time-controlled; multitasking; one interruption with up/down edge detection
Indicators	Power, Run, Error, Status of I/Os
RUN/STOP switch	Yes
User program protection	Password protection possible
Mounting position	Horizontal or vertical
Operating temperature	0 °C to +60 °C horizontal mounting; 0 °C to +40 °C vertical mounting with output load reduced to 50% per group
Humidity	Maximum 95%, without condensation
Protection degree	IP20 when all terminal screws are tightened
Mounting rail	DIN rail according to DIN EN 50022, 35 mm, depth 7.5 mm or 15 mm
Screw mounting	4 mm diameter screws; fastening torque 1.2 Nm
Net weight	300 g in the PM554-TP-ETH data-sheet specification

Configuration

Programming & Communication

Programming

ABB specifies IL, FBD, LD, SFC, ST and CFC programming languages for the AC500-eCo controller family. User programs can also be password protected.

Communication

Ethernet provides the onboard network interface. COM1 is an RS-485 interface supporting programming, Modbus RTU, ASCII communication and CS31 remote I/O functions.

System Architecture

Expansion & Terminal Connection

Central I/O expansion

The AC500-eCo platform permits central expansion with up to 10 I/O modules.

Terminal blocks

AC500-eCo I/O uses pluggable terminal blocks; the required terminal blocks should be checked against the installed configuration.

Service identification

When replacing a controller, retain the original order code and installed I/O configuration for configuration checking.

Installation & Diagnostics

Mounting & Service Checks

Mounting

35 mm DIN rail mounting according to DIN EN 50022.
Horizontal or vertical mounting is specified by ABB.
4 mm screw mounting is also provided.

Local diagnostics

Power, Run and Error indicators support first-level status checking.
I/O status indication assists local inspection of digital signals.
The RUN/STOP switch provides local operating-state control

Direct RFQ Support

AMIKON Industrial Automation · Contact: Miya Zheng

Email: sales@amikon.cn

WhatsApp: +86 180 2077 6792

50 Models Related Models

Buyer Questions

FAQ

How can I confirm that 1SAP120600R0071 is the correct replacement?

Compare the complete ABB order code on the installed controller with 1SAP120600R0071 and check the connected AC500-eCo I/O configuration before replacement.

Does PM554-TP-ETH support Ethernet communication?

Yes. Ethernet is integrated on the PM554-TP-ETH. The controller also provides the COM1 RS-485 interface for supported serial communication functions.

Can the existing AC500-eCo I/O configuration be retained?

The AC500-eCo platform supports central I/O expansion. Before replacement, the installed I/O arrangement and exact controller order code should be checked against the existing system.

What should be checked when the controller shows an Error condition?

Check the controller power and operating-state indicators first, then inspect the relevant I/O or communication connections according to the fault symptoms.

What information should I send for an RFQ?

Send the exact part number, quantity, destination, required date and machine/system model so the order can be checked accurately.

Source: ABB, PM554, PM556, PM564, PM566 Processor Module Data Sheet, 3ADR010065; ABB product record for 1SAP120600R0071. For procurement reference, search the exact model as PM554-TP-ETH datasheet.

Product Tags:


*From:	Your email address is incorrect!
*To:	AMIKON LIMITED
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	ABB PLC
Place of Origin:	SWEDEN
Delivery Time:	2-3 work days
Brand Name:	ABB
MOQ:	1
Payment Terms:	T/T

KJ3208X1-BA2	6SL3353-6TE32-1AA3	75HC0375	KJ4110X1-BC1	A5E38979248
FM19856	6ES7221-1BH32-0XB0	6SL3351-6GE36-1AB3	KJ2006X1-BK1	390R-070204M-MM 1040
6RY1243-0EA00	CE4035S2B5	M705	6SL3352-6TG41-3AA3	OTBVN6
A5E34612879	6SE7027-2ED84-1HF5	KJ4006X1-BD1	75HC0125	6SL3351-6GH34-1AB3
PCI-1220U	SE4022	6SE7033-5GJ84-1JC0	XTN32-34.93	KC4011X1-BZ1
6SL3130-7TE21-6AA4	6SL3355-6TE35-0AA3	KJ2201X1-BA1	ST201M-K2	6SL3351-6GE41-0AB3
KL2001X1-BC1	A5E01283291	6ES7214-2AD23-0XB8	VE4035S2B5	6SL3352-6TG41-0AA3
KJ3243X1-BK1	6RY1803-0AA05-0AA1	1900GSR-2USB-A	6SL3351-6TE32-6AA3	KJ3003X1-EA1
C98043-A1603-L11	6SL3351-6FE35-0AA1	KSH06-01S	6SE7024-7ED84-1HF5	SE5009
6SL3300-1AE32-5AA0	KL2002X1-BC1	A5F00133619	KJ4110X1-BB1	6DD1842-0AA0
396P-08-10-55