| Sign In | Join Free | My infospaceinc.com |
|
| Sign In | Join Free | My infospaceinc.com |
|
| Categories | Sleeve Connector |
|---|---|
| MOQ: | 300 |
| Connector Type: | 6.35mm Headphone Jack |
| Current Rating: | 1A |
| Brand Name: | PJ-625 |
| Voltage Rating (Max): | 50V |
| Packaging Details: | Through Hole |
| Description: | 6.35mm Headphone Jack 1A 50V Through Hole |
| Model Number: | PJ-625 |
| Delivery Time: | 5-6周 |
| Stock: | 3000 |
| Operating Temperature: | -20℃~+70℃ |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
This document outlines the specifications for the HY-WI-32 series 6.35mm Phone Jack (DIP) from HAOYU (HONG KONG) LIMITED. It details the product's ratings, operating and preservative temperature ranges, electrical and mechanical performance, and durability.
| Item | Description | Conditions | Specifications |
|---|---|---|---|
| 1 - RATING | DC50V | ||
| 2 - OPERATING TEMPERATURE RANGE | -20C~70C | ||
| 2 - PRESERVATIVE TEMPERATURE RANGE | 15C~35C | ||
| 3 - ELECTRICAL PERFORMANCE | CONTACT RESISTANCE | METER AT 0.1A DC5V. THE RESULT IS THE AVERAGE OF 5 SUCCESSIVE MEASUREMENTS. | 70m max |
| INSULATION RESISTANCE | BETWEEN TERMINALS AND FRAME, A VOLTAGE OF 250V DC SHALL BE APPLIED FOR 1 MIN. | 100M min | |
| 3 - ELECTRICAL PERFORMANCE | DIELECTRIC STRENGTH | BETWEEN TERMINALS AND FRAME, A VOLTAGE OF 250V AC SHALL BE APPLIED FOR 1 MIN. WITHOUT DAMAGE TO PARTS, ARCING OR BREAKDOWN ETC. | 250V AC |
| 4 - MECHANICAL PERFORMANCE | INSERTION AND WITHDRAW FORCE | APPLY TO THE APPENDED DRAWING. | 3-40N |
| TERMINAL STRENGTH | A STATIC LOAD OF 10 N (1000gf) SHALL BE APPLIED TO THE TIP OF THE TERMINALS FOR 60 SEC. IN ANY DIRECTION OF ACTUATOR. | No damage or excessive looseness. | |
| STANDARD ATMOSPHERIC CONDITIONS | AMBIENT TEMPERATURE | 15C TO 35C | |
| STANDARD ATMOSPHERIC CONDITIONS | RELATIVE HUMIDITY | 25% TO 75% RH | |
| STANDARD ATMOSPHERIC CONDITIONS | AIR PRESSURE | 80Kpa TO 106Kpa |
| Item | Description | Conditions | Specifications |
|---|---|---|---|
| 5 - DURABILITY | SOLDERING HEAT RESISTANCE (Wave soldering) | Within 3 seconds at 260 +/-5C | Electrical characteristics shall be satisfied. |
| SOLDERING HEAT RESISTANCE (Hand welding) | Within 3 seconds at 380C or below | Electrical characteristics shall be satisfied. | |
| 5 - DURABILITY | LIFE TEST | An actuator shall be subjected to 5000 cycles at a speed of 30 cycles per minute. | Mechanical and electrical characteristics shall be satisfied. (Contact Resistance 200m) |
| 5 - DURABILITY | HEAT TEST | 852C for 48 hours after test keep in normal condition for 30 minutes. | No damage on appearance. Mechanical and electrical characteristics shall be satisfied. |
| 5 - DURABILITY | HUMIDITY TEST | 402C 90-96%RH for 48 hours, test after keeping in normal condition for 30 min. | Mechanical and electrical characteristics shall be satisfied. |
| 5 - DURABILITY | COLD TEST | At -402C for 48 hrs. After test keep in normal condition for 30 min. | Appearance and electrical characteristics shall be satisfied. |
| 5 - DURABILITY | SALT SPRAY TEST | At 5% NaCl liquor for 24 hours, after washing, keep in normal condition for 30 min. | Without excessive corrosion or crack in appearance. |
|
