| 1 | RATING | | DC30V 0.5A | |
| 2 | OPERATING TEMPERATURE RANGE | | -20C~70C | |
| 2 | PRESERVATIVE TEMPERATURE RANGE | | -15C~35C | |
| 3A | ELECTRICAL PERFORMANCE - CONTACT RESISTANCE | 0.1A DC5V | 50 max | m |
| 3B | ELECTRICAL PERFORMANCE - INSULATION RESISTANCE | BETWEEN TERMINALS AND FRAME, 250V DC for 1 MIN | 100 min | M |
| 3C | ELECTRICAL PERFORMANCE - DIELECTRIC STRENGTH | BETWEEN TERMINALS AND FRAME, 250V AC for 1 MIN | WITHOUT DAMAGE, ARCING OR BREAKDOWN | |
| 4A | MECHANICAL PERFORMANCE - INSERTION FORCE | ACROSS SPRING PIECE AND MATCHING PLUG | 3-30 | N |
| 4A | MECHANICAL PERFORMANCE - EXTRACTION FORCE | ACROSS SPRING PIECE AND MATCHING PLUG | 3-30 | N |
| 4B | MECHANICAL PERFORMANCE - TERMINAL STRENGTH | STATIC LOAD OF 10 N (1000gf) TO TIP FOR 60 SEC | WITHOUT DAMAGE OR EXCESSIVE LOOSENESS | |
| 5 | DURABILITY - LIFE TEST | ACTUATOR SUBJECT TO 5000 CYCLES AT 30 CYCLES/MIN | ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | CYCLES |
| 5 | DURABILITY - SOLDERING HEAT TEST (WAVE) | 3 SECONDS AT 260 +/-5C | ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | C |
| 5 | DURABILITY - SOLDERING HEAT TEST (HAND) | 3 SECONDS AT 380C | ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | C |
| 5 | DURABILITY - HEAT TEST | 852C FOR 96 HOURS, THEN 60 MIN NORMAL CONDITION | NO DAMAGE ON APPEARANCE, MECHANICAL AND ELECTRICAL CHARACTERISTICS | |
| 5 | DURABILITY - HUMIDITY TEST | 402C 90-96%RH FOR 96 HOURS, THEN 60 MIN NORMAL CONDITION | ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | %RH |
| 5 | DURABILITY - COLD TEST | -253C FOR 96 HOURS, THEN 60 MIN NORMAL CONDITION | ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED | C |
| 5 | DURABILITY - SALT SPRAY TEST | 5% NACL LIQUOR FOR 24 HOURS | WITHOUT EXCESSIVE CORROSION OR CRACK IN APPEARANCE | |
