| [3] RATINGS |
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A (AC/DC Virtual value 50Hz) | |
| Ambient Temperature Range | -45 to +85 | |
| [4] PERFORMANCE - Electrical Performance |
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC, measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC, apply 500V DC between adjacent terminals
or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC, apply 200V AC (virtual value) for 1 minute
between adjacent terminals or ground. |
| [4] PERFORMANCE - Mechanical Performance |
| Locking Force | 1.96 * n (N) MAX | Insert and extract applicable FFC (0.3mm thickness) at a speed of
253mm/minute. |
| Withdrawal Force | 0.49 * n (N) MIN | Insert and extract applicable FFC (0.3mm thickness) at a speed of
253mm/minute. |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at a speed of 253mm/minute. |
| [4] PERFORMANCE - Environmental and Other Performance |
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at a speed of
less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load (UL 498). |
| Vibration | Discontinuity: 1 ms MAX. Contact Resistance: 60 m MAX. Appearance:
No Damage. | DC 1mA energized state; vibrate along X, Y, Z axes with amplitude
1.5mm; frequency 10-55-10Hz/min; duration 2 hours each axis. |
| Shock | Discontinuity: 1 ms MAX. Appearance: No Damage. | DC 1mA energized state; 490m/s {50G} shock in 6 directions; 3 times
each. |
| Heat Resistance | Contact Resistance: 60 m MAX. Appearance: No Damage. | Mate applicable FPC/FFC, place in 852 air for 96 hours, then return
to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 m MAX. Appearance: No Damage. | Mate applicable FPC/FFC, place in -402 air for 96 hours, then
return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance: 20 M MIN. Contact Resistance: 60 m MAX.
Appearance: No Damage. | Mate applicable FPC/FFC, place in 402, 90-95% RH air for 96 hours,
then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Contact Resistance: 60 m MAX. Appearance: No Damage, no corrosion. | 5 cycles of: 30 min at -452, 10-15 min at room temp/humidity, 30
min at 852, 10-15 min at room temp/humidity. |
| Salt Spray | Contact Resistance: 60 m MAX. Appearance: No Damage. | 484 hours exposure to a salt spray from a 51% solution at 352. Wash
with room temperature water after test and dry. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX. Appearance: No Damage. | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance: 60 m MAX. Appearance: No Damage. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia
solution. |
| Solderability | Solder Wetting: 95% of wetting area. | Soldering Time: 20.5 sec. Soldering Temperature: 2355, 0.2mm from
terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, no deformation. | Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2mm from
terminal tip. |
| [2] PRODUCT NAME AND PART NUMBER |
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | AFC06-S**FIA-00 | |
| [1] SCOPE |
| Applicable Products | 0.5mm Pitch FPC/FFC Connectors (Locking Series) | |
