| Appearance | Product surface without defect, dirt, crack, and mechanical damage.
Contacts without rust, plating not oxidized and not peeled. | |
| Dimensions | According to drawings | |
| Interchangeability | Shall be interchangeable with same specification products. | |
| Material - Terminal | Phosphor bronze, Thickness 0.15mm, Tin Plating: 3~4m | |
| Material - Housing | Nylon66 UL94V-0, Color: White | |
| Material - Contact Pin (for Opening Wafer) | Phosphor bronze, Thickness 0.30mm, Tin Plating: 3~4m | |
| Material - Opening Wafer Housing | Nylon46 UL94V-0, Color: Beige | |
| Material - Contact Pin (for Opening Wafer, Gold Plated) | Phosphor bronze, Thickness 0.30mm, Gold Plating: 3~4m | |
| Material - Lips Wafer Housing | PBT UL94V-0, Color: White | |
| Material - Contact Pin (for Lips Wafer) | Phosphor bronze, Thickness 0.30mm, Tin Plating: 3~4m | |
| Material - Solder tabs | Phosphor bronze, Thickness 0.25mm, Tin Plating: 3~4m | |
| Material - Tiepian Wafer Housing | Nylon46 UL94V-0, Color: Beige | |
| Electrical Performance - Rated Voltage | 250V AC/DC | |
| Electrical Performance - Rated Current | 2A AC/DC | |
| Electrical Performance - Contact Resistance | 20 m | |
| Electrical Performance - Insulation Resistance | 1000M | |
| Electrical Performance - Dielectric Strength | 500V AC/minute | |
| Mechanical Performance - Pin Retention Force | 10N per pin | |
| Mechanical Performance - Terminal Retention Force | 10N per pin | |
| Mechanical Performance - Plug-in Force | 3N per pin | |
| Mechanical Performance - Plug-out Force | 0.5N per pin | |
| Endurance Characteristics - Solderability | Time: 2.50.5S, Temperature: 2605, Area of Soldering: 95% | |
| Endurance Characteristics - Resistance to Soldering Heat | Time: 51S, Temperature: 2605, Appearance: No Damage | |
| Endurance Characteristics - Heat Test | Time: 96h, Temperature: +853, Appearance: No Damage, Contact
resistance: 20 m | |
| Endurance Characteristics - Cold Test | Time: 48h, Temperature: -253, Appearance: No Damage, Contact
resistance: 20 m | |
| Endurance Characteristics - Temperature Cycling | Low temp: -253, High temp: +853, 5 cycles. Test after keeping in
Normal Condition for 30 min. Appearance: No Damage, Contact
resistance: 20 m | |
| Endurance Characteristics - Constant Humidity Heat | Temperature: 602, Relative humidity: 90%-96% RH, Time: 96h,
Appearance: No Damage, Contact resistance: 20 m, Insulation
Resistance: 100M | |
| Endurance Characteristics - Salt Spray | Salt concentration: 51%, Temperature: 352, Time: 162h. After salt
is removed by running water and a drop is removed, it is measured.
Appearance: No Damage, Contact resistance: 20 m | |
