| Series Number | AFH26 |
| Number of Contacts | 13~73 |
| Max. Operating Voltage | 30V AC |
| Max. Current Rating | 0.2A DC |
| Operating Temperature Range | -55C ~ +85C (Including terminal temperature rise) |
| Operating Humidity Range | Relative humidity 90% Max. |
| Storage Temperature Range | -10C ~ +50C |
| Storage Humidity Range | Relative humidity 90% Max. |
| Contact Resistance (Initial) | 40 m Max. |
| Insulation Resistance (Initial) | 50 M Min. |
| Dielectric Strength (Initial) | No Breakdown at 250V AC (rms) for 1 minute |
| FPC Retention Force | Pos. x 0.15N Min. |
| Terminal Retention Force | Pos. x 0.08Kgf {0.8N} Min. |
| Repeated Actuator Insertion/Withdrawal Contact Resistance | 60 m Max. (After 20 cycles) |
| Temperature Rise | 30C Max. (At max. AC rated current) |
| Vibration Discontinuity | 1 sec Max. |
| Shock Discontinuity | 1 sec Max. |
| Heat Resistance Contact Resistance | 60 m Max. (After 96 hours at 852C) |
| Cold Resistance Contact Resistance | 60 m Max. (After 96 hours at -402C) |
| Humidity Insulation Resistance | 20 M Min. (After 96 hours at 602C, 90-95% RH) |
| Temperature Cycling Contact Resistance | 60 m Max. (After 5 cycles) |
| Salt Spray Contact Resistance | 60 m Max. (After 484 hours) |
| SO2 Gas Contact Resistance | 60 m Max. (After 24 hours at 505 ppm) |
| NH3 Gas Contact Resistance | 60 m Max. (After 40 minutes exposure) |
| Solderability Wetting | 75% of immersed area must show no voids, pin holes. |
| Resistance to Soldering Heat (Iron) | Appearance: No Damage. Conditions: 370~400C, 5 seconds Max. |
| Infrared Reflow Peak Temperature | 250C MAX. (3 Sec. or less) |
| Infrared Reflow Minimum Temperature | 230C MIN. / 2040 Sec. |
| PCB Flatness Requirement | 0.1mm Max. |
