| [3] RATINGS |
| Rated Voltage (MAX) | | | 50V |
| Rated Current (MAX) | | [AC/DC(virtual value)50Hz] | 0.5A |
| Ambient temperature Range | | | -45 +85 |
| [4] PERFORMANCE |
| 4.1 Electrical Performance |
| Contact Resistance | | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal
or ground. | 500M MIN |
| Dielectric Strength | | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1
minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance |
| Locking and Withdrawal Force | | Insert and extract applicable FFC at the speed rate of
253mm/minute. | Locking: 1.96*n (N) MAX
Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN |
| 4.3 Environmental and Others Performance |
| Repeated Insertion and Withdrawal | Contact Resistance | Insertion and withdrawal actuator up to 20 cycles at the speed rate
of less than 10 cycles/minute | 60 m MAX |
| Temperature Rise | Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | Contact Resistance | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours
in each X.Y.Z. axes, DC 1mA energized. | 60 m MAX |
| Vibration | Discontinuity | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours
in each X.Y.Z. axes, DC 1mA energized. | 1 ms MAX. |
| Shock | Discontinuity | 490m/s{50G}, 3 strokes in each X.Y.Z. axes, DC 1mA energized. | 1 ms MAX. |
| Heat Resistance | Contact Resistance | 852, 96 hours | 60 m MAX |
| Cold Resistance | Contact Resistance | -402, 96 hours | 60 m MAX |
| Humidity | Insulation Resistance | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours | 20 M MIN |
| Humidity | Contact Resistance | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours | 60 m MAX |
| Temperature Cycling | Contact Resistance | 5 cycles of: a) -452 30 minutes, b) 852 30 minutes | 60 m MAX |
| Salt Spray | Contact Resistance | 484 hours exposure to a salt spray from the 51% solution at 352. | 60 m MAX |
| SO2 Gas | Contact Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | 60 m MAX |
| NH3 Gas | Contact Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia
solution. | 60 m MAX |
| Solder ability | Solder Wetting | Soldering Time: 20.5 sec, Soldering Temperature: 2355, 0.2 mm from
terminal tip. | 95% or more |
| Resistance to Soldering heat | Appearance | Soldering Time: 50.5 sec, Soldering Temperature: 2605, 0.2 mm from
terminal tip. | No Damage, Deformation |
