| SCOPE | Production and inspection of Connector. | Covers SHENZHEN SHOUHAN TECHNOLOGY CO.,LTD general series type
strip connector (pin header) products. |
| USE CONDITION | Ambient temperature Range | -25+85 |
| USE CONDITION | Applicable Wire Sizes | AWG#22#30 |
| USE CONDITION | Applicable PC board thickness | 1.2~1.6 mm |
| Appearance | Product surface without defect, dirt, crack, and mechanical damage.
Contact without rust, plating not oxidized and not peeled. | |
| Dimension | According to drawings | |
| Interchangeability | Exchangeable with same specification products. | |
| Material - Terminal | Phosphor bronze | Thickness: 0.15mm, Tin Plating: 3~4m |
| Material - Housing (Type 1) | Nylon66 UL94V-0 | Color: White |
| Material - Contact (Type 1) | Phosphor bronze | Thickness: 0.30mm, Tin Plating: 3~4m |
| Material - Housing (Type 2) | Nylon46 UL94V-0 | Color: Beige |
| Material - Contact (Type 2) | Phosphor bronze | Thickness: 0.30mm, Gold Plating: 3~4m |
| Material - Housing (Type 3) | PBT UL94V-0 | Color: White |
| Material - Contact (Type 3) | Phosphor bronze | Thickness: 0.30mm, Tin Plating: 3~4m |
| Material - Solder tabs | Phosphor bronze | Thickness: 0.25mm, Tin Plating: 3~4m |
| Material - Housing (Type 4) | Nylon46 UL94V-0 | Color: Beige |
| Electrical Performance - Rated Voltage | 250V AC/DC | |
| Electrical Performance - Rated Current | 3A AC/DC | |
| Electrical Performance - Contact Resistance | 0.01 (Initial) / 10m (After tests) | |
| Electrical Performance - Insulation Resistance | 1000M (Initial) / 100M (After tests) | |
| Electrical Performance - Dielectric Strength | 1000V AC/minute | |
| Mechanical Performance - Male contact Retention force | 10N per pin | |
| Mechanical Performance - Female contact Retention force | 10N per pin | |
| Mechanical Performance - Plug-in force | 3N per pin | |
| Mechanical Performance - Plug-out force | 0.5N per pin | |
| Endurance Characteristics - Soldering rest | Time: 2.50.5S, Temperature: 2305, Area of Soldering: 95% | |
| Endurance Characteristics - Resistance to soldering Heat | Time: 51S, Temperature: 2305, Appearance: No Damage | |
| Endurance Characteristics - Heat test | Time: 96h, Temperature: +853, Appearance: No Damage, Contact
resistance: 20 m | |
| Endurance Characteristics - Cold test | Time: 48h, Temperature: -253, Appearance: No Damage, Contact
resistance: 20 m | |
| Endurance Characteristics - Temperature Cycling | 5 cycles (Low: -253, High: 853), Appearance: No Damage, Contact
resistance: 20 m | Test after keeping in Normal Condition for 30 min. |
| Endurance Characteristics - Constant Humidity | Time: 96h, Temperature: 602, Relative humidity: 90%-96% RH,
Appearance: No Damage, Contact resistance: 20 m, Insulation
Resistance: 100M | |
| Endurance Characteristics - Salt Spray | Concentration: 51%, Temperature: 352, Time: 162h, Appearance: No
Damage, Contact resistance: 20 m | After salt is removed by running wafer and a drop is removed, it is
measured. |
| Packaging | Inner packing: Plastic bag / Panel mounting attach material
packing. Exterior package: Carton. | Marked with product name, specification model, quantity, date.
Product in the box must not rock. |
| Transportation | Allow for any way transportation, cant get wet and mechanical
injury. | |
| Storage | Ambient temperature: -10 to +40, Relative humidity 80%. Store in
warehouse without acidic, alkaline air and other corrosive gas. | |
