| Sign In | Join Free | My infospaceinc.com |
|
| Sign In | Join Free | My infospaceinc.com |
|
| Categories | Sleeve Connector |
|---|---|
| Voltage Rating (Max): | 30V |
| Description: | -20℃~+70℃ 30V 500mA Through Hole Audio Connectors RoHS |
| Operating Temperature: | -20℃~+70℃ |
| MOQ: | 1000 |
| Current Rating: | 500mA |
| Model Number: | PJ-306B |
| Packaging Details: | Through Hole |
| Delivery Time: | 4-6周 |
| Brand Name: | PJ-306B |
| Stock: | 10000 |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
This document outlines the product specifications for the Qudio Jock Socket Conn T 44 A by XKB Connectivity.
XKB Connectivity
Qudio Jock Socket Conn T 44 A
| Test Item | Description | Test Condition | Standard | Requirement |
|---|---|---|---|---|
| Salt Spray Test (EEZEWI) | Mated connectors to 35+/-2C .Humidity:85%(R.H). PH value:6.5~7.2 and 5+/-1% salt condition for 24hours. After test, rinse the sample with water and recondition the room temperature for 1 hour test CR and IR. | EIA-364-26B | (1) contact Resistance: 100 m Max. (2) contact Resistance: 500 MQ MIN. (3) Appearance shall no rust, oxidation, corrosion and other undesirable phenomena. | |
| Solder ability | Solder Temperature: 245+/-3C Immersion Duration: 3+0.5 sec. Flux: RMA 25% | Wet Solder Coverage: 95 % Min. | ||
| Resistance to soldering heat | In case of solder iron (2 time) Temperature: 350C Time: 5+/-1s | Should not have any flaw, scratch and crack. | ||
| IR-reflow | Peak temperature 260C Max, 10 sec or more. Duration: 2 cycles Lead-Free Solder: Sn96.5Ag3Cu1.5 | MIL-STD-202G method 210F | Should not have any flaw, scratch and crack. No visual damage to insulator. | |
| Insertion/Extraction force | Measure the module insertion extraction force at 253mm/min. | EIA364-13 | 2.2N~22.2N | |
| Durability | Number of test cycle is 5000 minimum and cycles rate is 100 50 cycles per hour. | EIA 364-B | Contact resistance: 100 m Max. Change of 40 m Max. after testing. Insulation Resistance: 100 MQ min. No physical damage to Connector shall occur. | |
| Contact retention force | Apply axial pull out force on the Terminal assembled in the housing at a rate of 25+3mm min. | 100 N | ||
| Mechanical Shock | Accelerated Velocity: 50 G (490 m/s) Waveform: Semi Sine Duration: 11 m sec. No of Shocks: 6/dir., 3 axis (Total of 18 Shocks) | EIA364-27 | (1) contact Resistance: 100 m Max. (2) contact Resistance: 500 MQ MIN. (3) No electrical discontinuity greater than 100nsec. shall occur. | |
| Vibration | Frequency Range: 10-2000 Total Amplitude: 2m/s. Duration: 2.5 hours 3 axes | IEC 60512-6-4 | (1) contact Resistance: 100 m Max. (2) contact Resistance: 500 MQ MIN. (3) No electrical discontinuity greater than 100nsec. shall occur. | |
| High Temperature | The contact and card is exposed in the heat chamber 90C for 96 hours. After test stored at room temperature for 1 hours test CR and IR. | IEC 60512-11-3 | (1) contact Resistance: 100 m Max. (2) contact Resistance: 3500 MQ MIN. Function and performance shall be as specified. Not to change for physical appearance. | |
| Low Temperature | The contact and card is exposed in the cold chamber -25C for 96 hours. After test stored at room temperature for 1 hours test CR and IR. | IEC 60512-11-3 | (1) contact Resistance: 100 m Max. (2) contact Resistance: 500 MQ MIN. Function and performance shall be as specified. Not to change for physical appearance. | |
| Humidity resistance | Steady state 40C,90~95%RH for 96H with mate connectors * After test stored at room temperature for 1 hours test CR and IR. | IEC 60512-11-3 | (1) contact Resistance: 100 m Max. (2) contact Resistance: 500 MQ MIN. Function and performance shall be as specified. Not to change for physical appearance. |
|
