| Material | Housing | LCP (UL94V-0), Color: Natural or Black |
| Material | Terminal (Contact) | Phosphor Bronze, Thickness: 0.30mm, Plating: Tin Plating 3-4m MIN |
| Material | Housing | Nylon66 UL94V-0, Color: White |
| Material | Contact | Phosphor Bronze, Thickness: 0.15mm, Plating: Tin Plating 3-4m MIN |
| Material | Housing | Nylon46 UL94V-0, Color: Beige |
| Material | Contact | Phosphor Bronze, Thickness: 0.30mm, Plating: Gold Plating 3-4m MIN |
| Material | Housing | PBT UL94V-0, Color: White |
| Material | Contact | Phosphor Bronze, Thickness: 0.30mm, Plating: Tin Plating 3-4m MIN |
| Material | Solder tabs | Phosphor Bronze, Thickness: 0.25mm, Plating: Tin Plating 3-4m MIN |
| Material | Housing | Nylon46 UL94V-0, Color: Beige |
| Electrical Performance | Rated Voltage | 250V AC/DC |
| Electrical Performance | Rated Current | 2A AC/DC |
| Electrical Performance | Contact Resistance | 20 m |
| Electrical Performance | Insulation Resistance | 1000M |
| Electrical Performance | Dielectric Strength | 500V AC/minute |
| Mechanical Performance | Male contact Retention force | 10N per pin |
| Mechanical Performance | Female contact Retention force | 10N per pin |
| Mechanical Performance | Plug-in force | 3N per pin |
| Mechanical Performance | Plug-out force | 0.5N per pin |
| Endurance Characteristics | Soldering rest | Time: 2.50.5S, Temperature: 2605, Area of Soldering: 95% |
| Endurance Characteristics | Resistance to soldering Heat | Time: 51S, Temperature: 2605, Appearance: No Damage |
| Endurance Characteristics | Heat test | Time: 96h, Temperature: +853, Appearance: No Damage, Contact
resistance: 20 m |
| Endurance Characteristics | Cold test | Time: 48h, Temperature: -253, Appearance: No Damage, Contact
resistance: 20 m |
| Endurance Characteristics | Temperature Cycling | Low temperature: -253, High temperature: +853, 5 cycles,
Appearance: No Damage, Contact resistance: 20 m |
| Endurance Characteristics | Constant Humidity | Temperature: 602, Relative humidity: 90%-96% RH, Time: 96h,
Appearance: No Damage, Contact resistance: 20 m, Insulation
Resistance: 100 M |
| Endurance Characteristics | Salt Spray | Salt concentration: 51%, Temperature: 352, Time: 162h, Appearance:
No Damage, Contact resistance: 20 m |
| General Tolerances | X.X | 1.00 |
| General Tolerances | X.XX | 0.25 |
| General Tolerances | X.XXX | 0.15 |
| General Tolerances | X | 2.00 |
| General Tolerances | X.X | 1.00 |
| General Tolerances | X.XX | 0.35 |
| General Tolerances | 3.00 | 3.00 |
