| Sign In | Join Free | My infospaceinc.com |
|
| Sign In | Join Free | My infospaceinc.com |
|
| Categories | Rectangular Connectors |
|---|---|
| Voltage Rating (Max): | 250V |
| Description: | Connector Header 3 position 2mm Pitch 2A Right Angle -25℃~+85℃ |
| Pins Structure: | 1x3P |
| Operating Temperature: | -25℃~+85℃ |
| MOQ: | 10 |
| Contact Plating: | Tin |
| Contact Material: | Brass;PA66 |
| Stock: | 989 |
| Packaging Details: | Through Hole,Right Angle,P=2mm |
| Flame Retardant Rating: | UL94V-0 |
| Brand Name: | HC-PH-3AW-G |
| Model Number: | HC-PH-3AW-G |
| Number of PINs Per Row: | 3 |
| Mounting Type: | Right Angle |
| Delivery Time: | 1工作日 |
| Reference Series: | PH |
| Number of Rows: | 1 |
| Pitch: | 2mm |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
This specification applies to the PH series connector strip, covering product performance, test methods, and inspection requirements. It is designed for electrical connectivity with specific environmental and mechanical tolerances.
| Item | Part No. | Type | Material | Finish | Color | Specification |
| Terminal Contact | HC-PH - **** | PT Plug Spring | Phosphor bronze thickness 0.2mm | Tin plating: 35m | - | - |
| Housing Plastic | HC-PH - **** | P Socket | Nylon66 UL94V-0 | - | White | - |
| Wafer | HC-PH - **** | Plastic Socket | Nylon66/LCP UL94-0 | - | Beige | - |
| Contact | HC-PH - **** | Plug Pin | Brass thickness 0.50mm | Tin plating: 2.55m | - | - |
| Item | Rated Voltage | Rated Current | Requirement | Test Mode |
| Electrical Performance | 250V AC/DC | 2A AC/DC | - | - |
| Withstand Voltage | - | - | No breakdown or flashover | Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors |
| Contact Resistance | - | - | Initial value 20 | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector (Does not include wire resistance) |
| Insulation Resistance | - | - | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| Item | Requirement | Test Mode |
| Mechanical Performance | - | - |
| Single contact insertion force | 6N | Housing together with terminal ends with wafer matched at a rate per minute to 253mm inserting force test |
| Single contact Withdrawal force | 0.5N | Terminal and hole seat matched at a rate per minute to 253mm along the wire direction, pulled out from the hole seat |
| Terminal crimping Wire strength | 15N (AWG#22) 13N (AWG#28) | Axial pullout force on crimped wire at a rate per minute of 253mm |
| Pin Retention Force | 50N (AWG#22) 30N (AWG#24) 20N (AWG#26) 15N (AWG#28) | Exerts a force on the pin end at a rate per minute of 253mm until the needle exits Seat pull-out force |
| Fixed terminals And hole seat | 15N | Terminal and hole seat fixed force |
| Durability | Contact Resistance 30m | Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Discontinuity: Max 1 sec Contact Resistance 30m Appearance: No damage | Amplitude: 1.5mm p-p Direction: X, Y, Z axes Frequency: 10-55-10Hz/minute Period: 2 hours for each direction |
| Item | Requirement | Test Mode |
| Environmental Performance | - | - |
| Thermal Aging | Appearance: No damage Contact Resistance 30m | Temperature: 852 Period: 96 hours continuously |
| Temperature Rise | - | Mate connector measure the temperature rise of contact when the maximum rated current is passed |
| Constant Humidity | Appearance: No damage Contact Resistance 30m Insulation Resistance 500m | Temperature: 402C Relative humidity: 90-95% (RH) Period: 96 hours continuously |
| Temperature Cycling | Appearance: No damage Contact Resistance 30m Insulation Resistance 500m Withstand Voltage: No breakdown or flashover | One cycle: -553C (30min) to 853C (30min), room temp transition
10-15min Total cycle: 5 cycles |
| Salt Spray | Appearance: No damage Contact Resistance 30m | Concentration: 51% NaCl solution Temperature: 353C Period: 24 hours (pre-plated stamping) or 8 hours (post-stamping plating) |
| Solder Ability | Soldering Area: 90% | Solder temperature: 2455C Immersion period: 30.5S |
| Resistance to Soldering Heat | Appearance: No damage | Manual Soldering: Soldering time: 30.5S, Soldering pot: 3505C Wave Soldering: Soldering time: 50.5S, Soldering pot: 2305C |
|
