| Sign In | Join Free | My infospaceinc.com |
|
| Sign In | Join Free | My infospaceinc.com |
|
| Categories | USB DVI HDMI Connectors |
|---|---|
| Packaging Details: | SMD |
| Number of Contacts: | 24P |
| Stock: | 14000 |
| Delivery Time: | 5-6周 |
| Connector Type: | Type-C |
| Number of Ports: | 1 |
| Current Rating: | 3A |
| Brand Name: | USB-310C-B-SU |
| Mounting Type: | Laminated board |
| MOQ: | 1400 |
| Model Number: | USB-310C-B-SU |
| Voltage Rating: | 30V |
| Operating Temperature: | -20℃~+60℃ |
| Gender: | Female |
| Description: | USB-C (USB TYPE-C) Receptacle Connector Recessed Mount |
| Detection color: | Black |
| Company Info. |
| Shenzhen ECER Network Technology Co., Ltd. |
| Verified Supplier |
| View Contact Details |
| Product List |
This section details the electrical and environmental performance specifications for the HS45E product from HAOYU (HONG KONG) LIMITED, adhering to EIA and other industry standards.
HAOYU (HONG KONG) LIMITED
SPEC-USB-001
| Item | Description | Test Methods | Test Specification |
|---|---|---|---|
| 7.1 Insulation Resistance | Unmated connectors, apply 100Volts DC between adjacent contacts and contacts and ground. | EIA 364-21C | 100M minimum (unmated) |
| 7.2 Low Level Contact Resistance | 100mA max., 20mV Max. open circuit at 100mA Max. | EIA 364-23b | 40m(Max) initial for VBUS and GND contacts and all other contacts; delta 10m(Max) after test |
| 7.3 Dielectric Withstanding Voltage | Subjected to 100VAC (RMS) for 1 minute between adjacent terminals. | EIA 364-20 | There shall be no breakdown |
| 7.4 Contact Current Rating | 5.0A shall be applied collectively to VBUS pins and 1.25 A applied to the VCONN pin and 0.25 A the other contacts. | EIA364-70 | When the currents are applied to the contacts, the temperature rise shall not exceed 30 C at any point on the USB Type-C mated plug and receptacle under test, when measured at an ambient temperature of 25 C. |
| 6.1 Durability | Type C :10000 cycles cycle rate per hour of 200cycles manually. | EIA 364-09 | Must meet the following criteria after the cycle test is completed: - Contact resistance (40m > delta 10m (Max) after test) - Insertion force (5N to 20N) - Extraction force (8N to 20N) - Visual inspection (no exposed base metal on contacts) |
| 6.2 Cable Flexing | Dimension x=3.7x cable diameter | EIA 364-41 | 100 cycles in each of 2 planes 120 degree. No discontinuity over 1 microsecond During flexing or physical damage allowed |
| 6.3 Cable Pull-Out | 40 N steady state axial load for 1 minute | EIA-364-38 | No discontinuity or physical damage allowed |
| 6.4 4-axes continuity test | 8N tensile force for a period of 10 seconds Min; The specimen must subject to 0 ,90 ,180 ,270 direction. | EIA364-18 | No discontinuity greater than 1s and no physical damage to the specimen(one cable per test) |
| 8.1 Temperature Life | 105 C without applied voltage for 120 hours. | EIA 364-17 | Visual inspection, Test shall be done in sequences defined in EIA 364-1000.01. |
| 8.2 Thermal Shock | 10 Cycles - 55C and +85C. The USB 3.0 connectors under test must be mated. | EIA 364-32 | There shall be no evidence of any physical damage. |
| 8.3 Salt Spray | Subject mated connectors to 48 hours at 35C with 5%-Salt-solution concentration. | MIL-STD-202F, Method 101D, Test Condition B | 1).Shall meet visual requirement, show no physical damage. 2).Shall meet requirements of additional tests as specified in test sequence in Section 5 |
|
