Schneider Electric LMC400CAA10000 PacDrive 3 LMC400 Motion Controller

Product Overview

The Schneider Electric LMC400CAA10000 is a PacDrive 3 LMC400 motion controller supplied in the basic accessory-kit configuration. It combines PLC logic, synchronized motion control, machine communication and integrated digital and analog I/O in one cabinet-mounted controller.

The LMC400 platform supports the control of up to 16 coordinated servo axes through the Sercos motion network. LMC400CAA10000 is the complete commercial reference. LMC400 is only the controller-family designation and should not be used alone when ordering or selecting a replacement.

Main Features

• Exact commercial reference: LMC400CAA10000
• PacDrive 3 LMC400 motion controller
• Basic accessory-kit configuration
• Maximum capacity of 16 synchronized servo axes
• Intel Celeron M processor operating at 1.5 GHz
• 512 MB DDR2 RAM and 128 kB NVRAM
• CompactFlash card storage for controller project and system data
• 24 VDC rated supply voltage
• Integrated Sercos, standard Ethernet and real-time Ethernet interfaces
• Integrated CAN/CANopen and Profibus DP communication
• Digital inputs, touch-probe inputs and digital outputs
• Two analog inputs and two analog outputs
• Master encoder, PacNet, serial and USB interfaces
• Two option slots for communication expansion modules
• Temperature-controlled fan cooling
• Four-line alphanumeric diagnostic display

Technical Specifications

Compatible System and Applications

The LMC400CAA10000 is intended for PacDrive 3 machine-control systems requiring up to 16 coordinated servo axes. Typical applications include packaging machinery, filling and labeling equipment, robotic handling systems, printing and converting machines, assembly lines and synchronized material-handling equipment.

The controller may be used with compatible Sercos servo drives, distributed I/O, CANopen devices, Profibus DP devices, Ethernet equipment and other PacDrive machine components. Compatibility must be confirmed by the installed firmware, CompactFlash project, fieldbus configuration and complete machine architecture.

Maintenance and Replacement Notes

Before replacing an existing controller, verify the complete commercial reference, nameplate, hardware revision, firmware and controller project. Back up the CompactFlash card and machine program before disconnecting the original unit.

Confirm the Sercos network topology, Ethernet settings, real-time Ethernet protocol, CANopen configuration, Profibus DP configuration, serial interfaces, I/O assignments and option modules. Also verify the complete cable set, connected servo drives, motor matching, brake option, encoder type and shaft configuration.

Do not assume that an LMC402, LMC300, LMC600 or another controller is a plug-and-play replacement. Migration may require project conversion, firmware changes, communication reconfiguration, electrical modifications and machine recommissioning.

Related Models

LMC400CCA10000 is the corresponding LMC400 version supplied with the UPS accessory kit. Related controller families include LMC300 and LMC600 PacDrive motion controllers. Selection must be based on the exact commercial reference, accessory-kit configuration, firmware, CompactFlash project and installed machine system.

Inquiry and Supply Notes

Please provide the complete commercial reference, clear nameplate photographs, hardware revision, firmware information and controller-project details when requesting a quotation. Confirm whether the CompactFlash card, connector set and original accessory kit are required.

Because this is a discontinued legacy controller, product condition, testing status, included accessories, firmware, availability and delivery time must be confirmed before quotation.

Company Profile

DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide.

Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, hydraulic components, power supplies, electrical control devices, and industrial communication modules.

These products are used in CNC machinery, packaging equipment, robotics, production lines, water treatment systems, machine rebuilding, equipment maintenance, and other industrial automation applications.

We assist customers with model identification, part number verification, replacement part sourcing, quotation preparation, packing confirmation, and international shipping coordination. Before quotation, customers may provide complete model numbers, order codes, product photos, nameplate information, or technical specifications for verification.

For discontinued, legacy, or difficult-to-source components, we can also help check possible replacement options based on the exact model, hardware configuration, electrical specifications, communication interface, and application requirements.

Our objective is to provide clear product identification, practical sourcing support, reliable order handling, and efficient communication for industrial automation maintenance and spare parts procurement.

Service Scope

• PLC modules, controllers, and control system components  

• Servo drives, servo motors, and motion control components

• Variable frequency drives and AC drives

• HMI operator panels and industrial displays

• Industrial sensors, pressure measurement devices, load cells, and related components

• Pneumatic valves, cylinders, fittings, and accessories

• Hydraulic pumps, valves, cylinders, and control components

• Industrial power supplies, relays, contactors, circuit breakers, cables, and connectors

• Industrial Ethernet, fieldbus, and communication modules

• Legacy and discontinued automation spare parts

• Replacement part identification and model cross-checking

Industries Served

Our products and sourcing services support a wide range of industrial applications, including:

• CNC machinery

• Packaging machinery

• Robotics and automated equipment

• Factory automation and production lines

• Water treatment systems

• Machine building and equipment rebuilding

• Industrial maintenance and repair

• OEM equipment users

• System integrators

• Maintenance companies

• Industrial distributors

Why Choose DF Automatic

Model and Part Number Verification

We check model numbers, order codes, nameplate information, and product specifications before quotation to reduce the risk of incorrect part selection.

Support for Legacy and Discontinued Parts

We assist with sourcing older automation components and checking compatible or replacement options where applicable.

Efficient Quotation Support

Customers can send individual models or complete spare parts lists for quotation and availability checking.

International Order Coordination

We support packing confirmation, shipment preparation, and international logistics coordination according to order requirements.

Flexible Procurement Support

We can handle single replacement parts, urgent maintenance requirements, and larger industrial spare parts purchase lists.

Inquiry Information

For faster product confirmation and quotation, please provide as much of the following information as possible:

• Complete model number

• Part number or order code

• Product quantity

• Product photos

• Nameplate photos

• Required condition

• Technical specifications

• Existing machine or system information

• Destination country or shipping requirements

Important Note

Product availability, condition, price, lead time, configuration, and replacement options depend on the exact model number, part number, order quantity, technical requirements, and current supply conditions.

For products with multiple hardware versions, firmware versions, electrical specifications, communication options, or regional variants, the complete nameplate and order code should be confirmed before purchase.