Energy-Saving Flotation Machine for Copper Ore Processing
Low power draw per ton — cut the energy cost of copper flotation.
The BF-2.8 is a self-aspirated mechanical flotation machine for
copper ore flotation. Its 2.8 m³ cell and closed double-cone
impeller provide effective pulp circulation and air dispersion for
copper sulfide flotation circuits.
Copper Flotation DutyCopper flotation usually includes roughing, scavenging and cleaning
stages. The BF-2.8 can serve as a rougher or scavenger cell in
copper circuits where self-aspiration and self-pulping operation is
preferred, drawing air and pulp without auxiliary pumps.
Advantages- Self-aspirated and self-pulping operation for copper flotation
circuits.
- Closed double-cone impeller for strong downward pulp circulation.
- High air intake with relatively low power consumption.
- Horizontal arrangement for flexible circuit configuration.
- Suitable for chalcopyrite and other copper sulfide ores.
Working PrincipleThe motor drives the impeller through a belt drive. The rotating
impeller agitates the copper pulp and creates a vacuum that draws
air through the suction pipe into the impeller chamber. The
air-pulp mixture is dispersed into fine bubbles, and copper mineral
particles attach to the bubbles to form mineralized froth for
recovery.
FAQIs the BF-2.8 suitable for copper flotation?
Yes. It can be used in copper roughing and scavenging stages, and
suits copper sulfide ores such as chalcopyrite.
Does it require a foam pump?
No. The BF machine is horizontally arranged and does not require a
foam pump.
What is the capacity of the BF-2.8?
The listed capacity is 1.4–3.0 m³/min with a 2.8 m³ cell volume.
Contact us for BF-2.8 flotation machine configuration for your
copper ore flotation plant.
