Product Overview

Key Design Features

1. One printed strap, one solid strap. Both straps are the same width and the same construction; only the surface differs. That keeps the pair visible from a distance while leaving half the shoe as a plain colour, which is what stops a full animal print from looking heavy.

2. The straps cross at the instep, not on the toe. The crossing point sits over the highest part of the foot, so the junction is supported from below rather than pressing on the toes.

3. Square toe holds its line. A square toe is a moulded shape, not a cut, so it does not collapse at the corners the way a soft round vamp can after a season on the shelf.

4. The block heel is short and solid. It lifts the back of the sole clear of the ground without changing how the pair is walked in. It is a small lift, not a dress heel — the pair still packs and stacks like a flat.

5. Backless, so the fit is on the straps. There is no counter to hold the heel. The two crossed straps do the work, which is why both are cut wide enough to spread the load rather than bite.

6. The print is the same on all three colourways. Cream, peach and black all carry the identical leopard strap, so the print is a constant and the solid strap is the variable.

Factory Strength

Established 2006 — 20 years in moulded footwear.

Facility 30,000㎡ in Wuchuan, Guangdong.

Workforce 500+ workers across moulding, assembly and packing.

Capacity 3,000,000 pairs per month.

Export record shipped to 100+ countries.

Defect rate under 0.5% on final inspection.

Print alignment — the leopard repeat is checked for scale and for a pattern break at the strap edge, since a mismatched repeat reads as a defect at close range.

Heel bond — the block is checked for a flush joint with the sole on every pair, because a gap there is the first place a heel lifts.

Why Importers Choose This Product

It is the dressier end of a flat range. Almost everything on this page set is flat, platform or indoor. A pair with a print and a lift sits in a different part of the shop and at a different price, on the same mould budget.

Half a print sells better than a full one. A single printed strap gives the animal look without committing the whole upper, so it can sit next to plain stock without dominating it.

One print, three colourways. The printed strap does not change between colours, so the buyer carries one print decision and three solid colours instead of three prints.

It reads as an outfit pair, not a beach pair. The square toe and the heel lift take it out of the poolside category, which is where the rest of a summer order usually sits.

Same packing as a flat. The heel is short, so carton counts do not change and the pair does not need a heel box.

Product Specifications

Customization Options

Solid strap colour — three existing tones; custom shades on a colour-by-colour quantity review.

Print — the leopard repeat can be scaled or replaced with another print on a volume order.

Print placement — both straps printed instead of one, quoted by order.

Logo — printed on the footbed or the sole side.

Packing — poly bag as standard; hanger or inner box on request.

Container Order Information

Loading — 1,800 to 3,600 pairs per 20GP, depending on packing method.

Price term — EXW Wuchuan; FOB and CIF quoted on request.

Payment — 30% deposit, 70% against copy of shipping documents.

Sample — sample fee refundable against the bulk order.

Mixed colours — one container can mix all three colourways at agreed ratios.

Quality Control

Print repeat — the leopard scale is checked per strap and compared across pairs in the lot.

Print at the edge — the pattern is checked where it runs off the strap edge, since that is where a break shows.

Heel joint — the block is checked for a flush bond with the sole.

Toe shape — the square corners are checked for symmetry pair to pair.

Strap tension — both straps checked for equal tension, since the fit relies on them.

Final inspection — AQL 2.5 on major defects, with defect rate held under 0.5%.

Product Image

Three colourways shown together, each carrying the same leopard strap. Individual colour images supplied on request.

Factory Overview

Recommended Markets

West and North Africa — print and a lift sell where a plain flat has stopped moving.

Middle East — the square toe and heel read as an indoor and visiting pair, not beachwear.

Latin America — animal print is a volume seller in this category, and one printed strap keeps it wearable.

Southeast Asia — resort and city retail both take it, which extends the season past the beach months.

Online retail — the print gives contrast in a flat product photo without needing a styled shoot.

Packaging

Standard — one pair per poly bag, 30-40 pairs per export carton.

Heel — the block is short enough that carton counts match a flat, and no heel box is needed.

Carton marking — size, colour, print and item number stencilled as agreed.

Hang tag — buyer artwork applied at packing.

Mixed cartons — colour assortments can be packed per carton on request.

Frequently Asked Questions

Is the leopard real fur or leather?

Neither. It is a printed PVC surface. No animal material is used anywhere in the pair.

Does the print match across pairs?

The scale and repeat are held to a standard, but a printed strap is cut from a run, so the exact placement of spots differs from pair to pair. It is not a defect and it is not repeatable.

How tall is the heel?

It is a low block, a lift rather than a dress heel. The exact height is confirmed against your approved specification on order rather than quoted as a fixed figure here.

Why is there no strap at the back?

It is a backless mule. There is no counter to hold the heel, so the two crossed straps carry the fit — which is why both are cut wide.

Will the heel come off a backless pair?

The block is bonded to the sole and checked flush on every pair. A backless pair does not grip the heel, so the sole does move against the foot — that is normal for the style, not a fault in the bond.

Where does this pair wear first?

At the print, where the strap flexes at the crossing point, and at the toe edge where a square corner meets the ground.

Is the square toe comfortable?

A square toe holds the same width at the front instead of tapering. It suits a broad forefoot; a very narrow foot can feel the corners.

How many colours are available?

Three: cream, peach and black. All three carry the same leopard strap.

Can I have both straps printed?

Yes, on a volume order. A second print costs a second print run, so it is quoted by quantity.

Can I change the print?

Yes. The repeat can be rescaled or replaced with another print, subject to a minimum run per print.

What sizes are available?

EU 36-41 as standard. Other runs are reviewed against mould availability.

How heavy is a pair?

Around 400 g for the standard run, confirmed against your specification on order.

Can you print my logo?

Yes. Printed on the footbed or the sole side.

What is the minimum order quantity?

1,800 pairs, made up of one size range and three colours.

What is the lead time?

15-25 days after deposit, depending on colour split and packing.

Can I get a sample first?

Yes. The sample fee is refundable against the bulk order.

What are the payment terms?

30% deposit, 70% against copy of shipping documents.

What is the price term?

EXW Wuchuan as standard. FOB and CIF are quoted on request.

How many pairs fit in a 20GP?

1,800 to 3,600 pairs, depending on whether the order ships in poly bags or inner boxes.

Can I mix colours in one container?

Yes, at agreed ratios across the three colourways.

Inquire for Container Load Pricing

Send your size run and colour split and we will quote against your packing method.

Contact form: www.chongdislippers.com/contactnow.html