High Stability 16S 320A RC Boat ESC Electronic Speed Controller Delicate Design

16S 320A Intelligent Brushless Controller RC boat esc For Efoil

Basic information:

Feature:

Set the required speed with the speed adjustment potentiometer. The sensor measures the actual value of the engine speed through the ring gear on the flywheel and sends it to the controller. The actual value in the controller is compared with the set value. The control line is arranged and enlarged, and the output shaft of the actuator is driven. The fuel pump pin is pulled by adjusting the connecting rod to adjust the oil supply amount, thereby achieving the purpose of maintaining the set rotation speed.

This electronic governor can also choose the size of the unevenness according to the needs of the engine. When the stepless speed regulation is performed, the electronic control system eliminates the difference between the set speed and the actual speed caused by the load change, so that the engine maintains the original set speed. According to the needs of the unit, the unevenness potentiometer can also be adjusted to achieve a satisfactory static adjustment rate of the speed control system.

The electronic governor is also equipped with a variety of accessory devices. According to the needs of the unit, the corresponding accessories can be installed to realize the functions of automatic synchronization, load distribution and load preset.

The electronic governor is characterized by the ability to independently determine the speed regulation characteristics, and to determine the optimum torque characteristics, idle speed characteristics and transition characteristics when all accessories are installed. The electronic dispatcher can adapt to the requirements of different models.

Setting function value:

1. Reverse: On/Off.

2. Timing:0°,1°,2°,3°,4°……30°.

3. Frequency: 8KHz, 16 KHz, 32 KHz.

4. Acceleration: Soft / Medium / Hard.

5. Accumulator type:NiCd/NiMh,Li-Ion/Li-Pol,LiFe.

6. NiCd/NiMH CUTOFF:×0.05,0.4V,0.5V,0.6V,0.7V,0.8V,0.9V,1.0V.×0.05 means the cut off voltage is 5% the voltage while connecting.

7. Number of cells:Auto,2S,3S,4S,5S,6S,7S,8S,9S,10S,11S,12S,16S.

8. LiIo/Pol CUTOFF:2.0V,2.1V,2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V,2.9V,3.0V,3.1V,3.2V,3.3V,3.4V,3.5V,3.6V.

9. LiFe cutoff:2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V

10. Cut Off Type::Slow down,Hard. l

11. Power limited forward: Off, 75%, 50%, 25%.

12. Power limited reverse: Off, 75%, 50%, 25%.

13. Delay time when direction convert: 0.25S, 0.5S, 0.75S, 1S, 1.5S, 2S, 3S, 5S.

14. Reverse point:Auto,fixed 1.0mS,fixed 1.1mS,fixed 1.2mS,fixed 1.3mS.

15. Forward point:Auto,fixed 1.7mS,fixed 1.8mS,fixed 1.9mS,fixed 2.0mS.

16. Throttle curve: Logarithmical,Linear,Exponential.

17. Rotation direction: Left, Right.

18. Timing monitor (TIMING MONTITOR): ON, Off.

Note:the red mark is the factory default value,you can setting function value by youself.

Products Picture:

Shenzhen Flier Electronics Co., Ltd. is a high-tech enterprise specializing in the research, development, production and sale of electronic products in the field of robots and UAV aeromodelling.The company's professional products are the electronic speed controller(ESC) for DC brushless motor.

Founded in 2004, the company is located in the busy section of Xixiang Street in Shenzhen. After years of development, the company has now become a professional manufacturer of brushless electronic speed controller with a wide range of varieties in China.

Our company's ESC series products are relatively advanced in the market, with more functions.It can communicate with the computer in two directions. The computer can automatically identify the type of the ESC. The computer can read the parameters of the ESC and program them. It can also be updated the firmware. Some of ESC can load the popular open source firmware.

ESC can be controlled via PWM, the DC voltage, RS232,RS485 . Some ESCs can be controlled via CAN bus too.

The company's ESC products cover ESC for marine, ESC for airplane, ESC for helicopter, ESC for multicopter, ESC foe car, ESC for surfboards, ESC for skateboards and Industrial controller.

Power ranges from 1000W to 30KW, and low voltage series voltage ranges from 12V to 30V(2S-8S).middle voltage series voltage ranges from 30V to 60V(8S-14S).high voltage series voltage ranges from 60V to 120V(14S-28S).supper high voltage series voltage ranges from 120V to 500V. the current ranges from 100 amps to 500 amps.Ultra-high ESC products are our absolute strength.

Our products have independent intellectual property rights. If necessary, we can make firmware according to customer's requirements. Our company also has a strong ability to develop new products, and has developed or is developing some related electronic products, so as to maintain the technological leading edge in this field.

The company's products have strict quality control standards, to ensure the optimization of product quality. At the same time, according to the differences of customer needs, we constantly enrich product categories, improve product functions, improve product quality and optimize product mix in order to provide customers with professional products and quality services.

We are in line with "quality innovation to win the market, the good faith management cast the future."

philosophy, rigorous and meticulous work style, high cost-effective products,  We willing to make

the friend and sincere cooperation, create brilliant with all over the world!