Water Resistant Fibre Optic Distribution Box For Fusion Splice Easy Installation

Product Description

The distribution box can be used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.

FTTH Box Our terminal box is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for mini-network terminal distribution, in which the optical cables, patch cores or pigtails are connected.

Characteristics

1) Water-proof design with IP-66 Protection level.
2) Integrated with splice cassette and cable management rods.

3) Manage fibers in a reasonable fiber radius condition.

4) Easy to maintain and extend the capacity.

5) Fiber bend radius control more than 40mm

6) Suitable for the fusion splice or mechanical splice

7) Efficient cable management

Installation:Wall hanging:
1 According to the backplane mounting hole’s distance, hit 4 mounting holes on the wall, and knock the plastic expansion sleeve.
2 Fixed the box on the wall with M8 * 40 screws.
3 Position the upper end of the box into the wall hole, and then use M8 * 40 screws fix the box on the wall.
4 Check the box installation, close the door after qualified. In order to prevent rainwater from entering the box, the box should be tightened by a key column.
5 Insert the outdoor optical cable and butterfly type optic cable according to the construction requirements.

Specification

Product Show