Cummins Engine Hydraulic Cable Tensioner Transmission Line Construction

Cummins Engine Tension Machine For Transmission Line Construction Max Back Pulling Speed 3km/h

Operate Accord to the Followed Order when Starting

1. After fixed the tension machine, open the “power” switch, pull the start switch to start diesel engine and observe whether the index on the displays is normal.

2. Put all the control handles in the control box in starting position, including:

(1) Put engine throttle in minimum position (idle speed).

(2) Rotate the knob “PULLING HANDLE” to median position, that is position of “TENSION”.

(3) Loosen all the “TENSION REGULATIONT” ” REGULATION OF REEL WINDER PRESSURE”.

(4) Rotate the knob “BRAKE” to the position of “Brake”.

3. Keep the engine in idle speed for 1-2 minutes after starting and observe whether the displays of the instruments are normal at the same time. Pay attention that the index of "BEAKE PRESSURE" can’t be lower than 1.8MPa or higher than 2.5MPa; Otherwise, it is necessary to stop the machine for inspection.

4. Within 10 seconds, if the engine failed to start, the knob should be released immediately and started for a second time after one minute. If it couldn’t start three times in a row, it should be stopped and the operators must find out the reasons, debug them and start later.

5. When delivering under tension, the brake should be released at first. The method is as following: Rotate "Brake" to "Release" position, observe whether the readings of "Brake Pressure" are not less than 3.5Mpa, if the brake pressure had declined, it needs shutdown inspection.

Established in 1993, Yixing Boyu Electric Power Machinery Co., Ltd. is a manufacturer specialized in the research, development and production of Electric Power Machinery, CE certified.

We are located in beautiful and rich city: Yixing city. We are a High-tech enterprise in Jiangsu Province, with convenient transportation access. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

    1. Main configurations of our machine are from Germany and USA

• Engine: American Cummins
• Main pump: German Rexroth
• Main motor& speed reducer: German Rexroth
• Tail bracket hoisting motor: American Eton
• Hydraulic meter: German

    2. Our company have more than 25 years rich experience in this field. Our product sells in distant markets: Sudan, Kenya, Angola, Pakistan, Burma, India, Mexico, Germany etc. Our product is also very popular in china.

    3. We have one year quality guarantee, if internal components go wrong within one year, we will change another for free.

    4. We can supply the specific components to the buyers with cost price after warranty period.

Company

Workshop

Construction Site