12 Meter Ultrasonic Liquid Level Sensor PVDF Material

KUS Series Ultrasonic Sensor

1. Features

• Various laboratory parameters such as precision and resolution are qualified
• Multi-layer sealed waterproof and dustproof sensor with piezoelectric element
• Seal ring and fully enclosed probe
• IP68 protection level
• Waterproof and anticorrosion

2. Description

The ultrasonic object/liquid level sensor is installed on the upper part of the container, and under the functional control of the combined unit and electronic components, the probe emits a beam of ultrasonic pulses to the measured object. The sound wave is reflected by the surface of the object, and part of the reflected echo is received by the probe and converted into an electrical signal. The time from ultrasonic emission to re-reception is proportional to the distance from the probe to the measured object. The electronic unit detects this time and calculates the measured distance from the known speed of sound so that the level value can be calculated. Since temperature has an effect on the velocity of sound, the meter should measure temperature to correct for the velocity of sound. There are many options for the four-wire system, which can support 4-20mA and RS485 communication at the same time.

PVDF (polyvinylidene fluoride) has the strongest toughness, low friction coefficient, strong corrosion resistance, aging resistance, weather resistance, and good radiation resistance among fluoroplastics. It is suitable for use in various outdoor places, remote detection, on-site liquid level/level display.

3.Low power consumption mode

Work mode set to 2 is low power concumption working mode.

How to realize the low power consumption ultrasonic level and distance sensor

a) Use low power ICs

We use almost new ICs by wich the power consumption is normally low.

b) Controll the power of each circuit in the sensor.

There are three parts of the circuit in the sensor, the transmitting circuit, the receiving circuit and the basic circuit of the mcu. The mcu realizes power consumption management by enabling control of the work of each part of the circuit, and then controls the power consumption.

c) When the mcu itself is not working, it enters sleep mode to further reduce power consumption.

4.Installation conditions
If the sensor is installed at the environment temperature fall below 0℃, It should do well on the protective measures. In case of direct mounting of the sensor in a through hole using the steel nuts, it has to be fixed at the middle of the housing thread.

5.Ordering information

Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of  measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments .

We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. Based on experienced technical and management personnel, through efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.

Xi'an Kacise is qualified with ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof certificates, etc. which ensure that our products comply with international standards.

Kacise sensors have already been exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regard “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.

Our goal is simple: to sell the best products at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business , to help others achieve their goals.