AW-081 Hand Brush Polyurea Coating Polyurethane Waterproof Coating

1. Introduction

AW-081 hand brush polyurea coating is composed of isocyanate prepolymer, polyether amines, amine extenders and other additives. AW-081 is a two-component, solvent-free, hand-applied polyurea coating system. AW-081 is used in large-scale protection projects without mechanical construction conditions, it is also used in local repair of conventional sprayed polyurea coating. AW-081 has strong adhesion, good elasticity, bright and full paint film, excellent wear resistance and moisture insensitive. It can be applied by hand scaping.

2. Advantage

• No VOC’s, safe construction, environmentally friendly.
• Excellent physical properties, excellent adhesion on variety of substrates.
• Excellent abrasion resistance.
• Excellent weather resistance, no chalking.
• Consecutive and seamless coating film, smooth and beautiful coating surface.
• Atmospheric temperature curing, fast post curing.
• No crystallize at 0°C, moisture insensitive.

3. Application

AW-081 is used in large-scale protection projects without mechanical construction conditions, it can be used as a substitute for sprayed polyurea elastomer and can also be used as a local repair material after sprayed polyurea elastomer system is damaged.

4. Technical data

5. Mixing and packing

According to the weight ratio A:B=5:2 for ingredients.

Packing specifications:

A: 5 kg/drum; B: 2 kg/drum.

Packing specification can be changed as per customer request.

6. Coating method

1. Component B should be fully stirred evenly before use (no bottoming, consistent color).
2. Accurately weigh and mix components A and B according to the proportion, stir them well manually or mechanically before construction.
3. Hand-applied scraping, the coating interval should not exceed 24h.
4. It should be prepared and used according to the needs of the site when using, so as to avoid the paint gelling and scrapping.
5. Suggested single-pass construction thickness: 0.2-0.3mm for elevation, 0.5-1mm for plane.

7. Construction attention

1. During construction, the temperature of the substrate should be higher than the dew point temperature by more than 3°C. Avoid construction in bad weather such as wind, rain and snow.
2. Before construction, Component B must be fully stirred evenly.
3. It should be prepared in strict accordance with the proportion, and the construction loss caused by the wrong proportion shall be at your own risk.
4. If the coating is used for multiple times, the packaging drum should be sealed tightly at any time after the material is taken, so as to avoid the moisture absorption and deterioration of the material affecting the use and performance.
5. During constructing in a closed space, good ventilation should be ensured.

8. Labor protection

In the process of using AW-081, workers must wear work clothes, wear goggles, gloves, gas masks and other labor protection supplies; the construction space must ensure good ventilation, at the same time, isolate fire source and keep away from the heat source.

9. Storage and transportation

1. This product should be stored in a cool, ventilated, and dry warehouse. It is strictly prohibited to be exposed to rain and sun. Isolate fire source and keep away from heat source. The storage temperature should be 15~40℃. The shelf life is 12 months from the date of manufacture without opening the original packaging.
2. This product is organic solvent free and can be transported as non-dangerous goods. During transportation, it shall be strictly prohibited to be exposed to rain and sun and shall comply with the relevant regulations of the transportation department.

10. Disclaimer

1. The performance of the material is largely affected by factors such as spraying thickness, uniformity, and substrate surface preparation. The agreed using conditions should be met when using this product.
2. This specification is an accumulation of long-term testing and experience. Published technical data and instructions are subject to change without notice.

Qingdao Exceed Fine Chemicals Co., Ltd is a high-tech enterprise that integrates manufacturing and trading. We specialize in the production of polyurethane-based products.

Our company is dedicated to investing in research and development of cutting-edge products, collaborating with leading Chinese universities and institutions. We have successfully developed a heat-vulcanization, environmentally friendly bonding adhesive that rivals the quality of world-renowned brands like Lord and Dow.

At Exceed, we believe in the power of science

Qingdao Exceed Fine Chemicals boasts a team of over 30 skilled technicians, supported by advanced manufacturing equipment and robust production processes. We maintain an independent R&D institute and foster strong collaborations with leading universities and research institutions to continuously enhance our production processes, product quality, and performance.

With decades of dedicated efforts, we have successfully exported our products to markets across the globe, including Europe, Asia, North America, South America, Oceania, and Africa.

Furthermore, leveraging our extensive domestic network, we act as a reliable purchasing agent, assisting customers in sourcing specific materials according to their unique requirements.

 Furthermore, we employ a dedicated team of quality control (QC) professionals with expertise in the field of chemicals. This rigorous quality control ensures consistent and reliable product quality for our valued customers.

Currently, we achieve annual export sales exceeding USD 30 million to over 30 countries worldwide, encompassing a diverse product range including polyurethane chemicals, heat-vulcanization environmental friendly bonding adhesive etc.

We understand that customers prioritize competitive pricing, exceptional quality, and consistent product availability. We firmly believe that Exceedchem is the ideal partner to fulfill your specific needs.

As a trusted purchasing agent for clients worldwide, we leverage our extensive experience to source high-quality products at competitive prices. Our primary objective is to deliver the most cost-effective solutions while maintaining the highest standards of quality.