Durable KE-3010 SMT Mounter Machine With Multi Nozzle Laser Head

High Speed Modular SMT Mounter Machine KE-3010 Durable With Good Condition

Descriptions:
The KE-3010 is JUKI's latest leading-edge technology for improved flexibility and production quality. It supports both electronic and mechanical tape feeders and can handle boards up to 610x560 mm. With its multi-nozzle (six nozzles) laser head, the KE-3010 can achieve a rated IPC9850 speed of 18,500 cph and is capable of a component placement range from 01005 to 33x33 mm.

Features:

♦ Single Gantry, 1 Head per Gantry:

Ideal for high-mix, high-changeover, environments...

♦ 6 Nozzles per Gantry (plus IC Head on 3020V):

It can place 6 components simultaneously and center on the fly...

♦ High Accuracy Low Noise Ball Screw Drive With Linear Encoders:

♦ High Accuracy Laser Align Component Centering:

Select centering method based on component type, ship, size and material...

♦ High Speed Strobing Vision Centering System (3020V only):

On-the-flying-vision centering increase placement speed by eliminating wasted stops over camera...

♦ Quick Change Feeder Trolleys:

Supports both electronic and mechanical feeder trolleys...

♦ Standard POP Capacibility:

Package-on-package assembly is fully supported using either linear or rotary fluxer units...

Specifications:

Advantages:

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

The main advantages of SMT over the older through-hole technique are:

♦ Smaller components.

♦ Much higher component density (components per unit area) and many more connections per component.

♦ Components can be placed on both sides of the circuit board.

♦ Higher density of connections because holes do not block routing space on inner layers, nor on back-side layers if components are mounted on only one side of the PCB.

Fujintai Technology Co., Ltd was founded in early 2003, is one of the earlier companies in the smt industry. Company has been committed to smt equipment and accessories, and peripheral products sales, maintenance, maintenance and technical advisory services. At smt placement machine, plug-in machine, tin paste printing machine, dispensing machine and other industrial control card maintenance for many years, with a number of decades of maintenance experience of senior engineers. Rich knowledge and practical experience in various fields of microelectronics, electromechanical, automation and computer. 

Company's main business:

1. Sales and repurchase of all kinds of new and used smt equipment and accessories, including placement machine, tin paste printing machine, Reflux

Furnace, X-Ray, AOI, upper and lower board machine and Feeder, etc.

2. Supply full range Juki original factory accessories.

3. Refined Juki equipment components: such as Laser, Driver, Servo Motor and Control Board.

4. Refinement cyberoptics series of optical sensor devices: Juki Laser, Samsung Laser, Philips Laser, Tenryu Laser, Autotronik Laser, Yamaha Laser, Dek Camera, etc.

5. Professional sales and refinement of Panasonic CM20F, CM202, CM301, CM402, CM602 Drive, the model available has: MR-J2-40B-XT63, JM-J2-70B-XT63, MR-J2-20A-N26, MR-J2-40A-N26, MR-J2S-40B-EE085, MR-J2S-70B-EE085, MR-J2S-100B-EE085, MR-J2S-60B-S041U638, MR-J2S-350B-S041U703, etc.

6. SMT peripheral equipment and accessories sales and so on.

7. SMT placement machine rental services.