Electron Parts And Components Made From Nitronic 60 Bars With Good Perfromance

Electron Parts and Components Made From Nitronic 60 Bars With Good Perfromance


1 . Description

Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. This grade is best known for its wear and galling resistance.

The additions of Silicon and Manganese have given this alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working. This working does not enhance the anti-galling properties as is normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into the material is added strength and hardness, and the wear resistance does not decrease noticeably. Chromium and Nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. The high mechanical strength in annealed parts permits use of reduced cross sections for weight, and cost reductions through the use of thinner stock.

2 .Characteristics

Corrosion Properties

The corrosion resistance of Armco NITRONIC 60 Stainless Steel falls between that of types 304 and 316. However, experience shows that in a wear system, a galling or siezure failure occurs first, followed by dimensional loss due to wear, and finally corrosion. Galling and wear must be the first concerns of the design engineer. Although the general corrosion resistance of NITRONIC 60 is not quite as good as Type 316, it does offer better chloride pitting resistance, stress corrosion cracking resistance and crevice corrosion resistance than Type 316 in laboratory conditions. Corrosion tests are not normally performed with NITRONIC 60 High Strength.

Corrosion Resistance
Nitronic 60’s uniform corrosion resistance is better than 304 stainless in most environments. The yield strength of Nitronic 60 is nearly twice that of 304 and 316 stainless steels. Chloride pitting resistance is superior to that of type 316 stainless; Nitronic 60 provides excellent high temperature oxidation resistance and low temperature impact.
Applications using Nitronic 60 are valve stems, seats, and trim, fastening systems, screening, pins, bushings and roller bearings, pump shafts and rings. Other uses include wear plates, rails guides, and bridge pins.

Wear Resistance
This alloy provides a significant lower cost way to fight wear and galling compared to Nickel or Cobalt based alloys.

Bloom(Suzhou) Materials Co., Ltd ，which located in the beautiful city of Zhangjiagang , Suzhou,China. 
Bloom Company is a technology research and development enterprises which integrats technology research and development, production and trade.It mainly dealing two types of products based on the alloy materials. Spot welding accessories and twin extruder spare parts. 

With independent research and development team, Bloom focuses on technological innovation. It has provided super wear resistance, corrosion resistance, high temperature resistant core parts for many twin screw extruder users both at home and abroad and blending modification of enterprises. With continuous pursuit of technological innovation, we committed to providing customers with high quality products and services. In the global market, Our products are widely used in all fields such as plastics, miners, energy, aviation and etc. High-quality products can be developed according to customer needs combined with the actual working conditions. Whether it is high temperature, high corrosion conditions, or high torque, high strength mechanical needs, Bloom’s products can perform the task excellently. It can achieve excellent performance, stable quality, reasonable price, timely delivery, perfect after-sales.
We will advance with the times with the management idea of cooperation, win-win, integrity and open, to provide customers better products and more efficient service. Share a brilliant tomorrow with you!

Products Scope of Bloom Alloy

Nickel and iron base  Alloy(KCF alloy, Nickel alloy)

Spot Welding Accessories(Electrodes, Cap tips , Guide Pins and so on)
Twin Screw Extruder Spare Parts
Parallel Twin Screw Extruder Parts 
Conical Screw Extruder Parts

Other Precision Alloy Materials and Parts

Service  of Bloom

Alloy Material  Self Production

Non-Standard Product Reseach and Test

Precision Machinning

Spot Welding Parts offering

Twin Screw Extruder Spare Parts Supply

Logistics Service

After sales service

Advantages of Bloom 

Experienced Engineers in Alloy Businss
More then 20 years experience in alloy materials offering

High Quality Control System

Authorized Certificates

Guaranteed Delivery and Quality

More then 20+Countries customers trust.

Bloom is engaged in offering special and high quality performance alloy and parts to the whole world, Choose Bloom, Choose a sucessful business partener!