Impeller Centrifugal Pump Set With Jockey Pump UL Listed Fire Pump Tornatech controller

UL End Suction Pump , Diesel Engine Fire Pump 250gpm@110psi

Fire Pumps are used to supply water for automatic sprinkler
systems, standpipes or fire hydrants. NFPA No. 20 classifies fire
pumps as split case, vertical turbine, end suction, or In-Line
design. In-Line fire pumps have capacities of 50, 75, 100, 150,
200, 250, 300,400, 450, 500, and 750 GPM; End Suction pumps are
rated for 100, 200, 250, 300, 400,450, 500, and 750 GPM; Split case
and vertical turbine fire pumps are rated 150, 200, 300, 450, 500,
750, 1000, 1250, 1500, 2000,3000, 3500, 4000, 4500, and 5000
GPM.All fire pumps are rated at 40 pounds per square inch or more
of boost.

Fire Pumps of the type described shall meet the following basic
requirements: 

1.Each pump is to be tested hydrostatically

for not less than 5 minutes. The test pressure is to be not less
than 1.5 times the maximum working pressure of the pump, but in no
case less than 250 psi (1724 kPa).

2.A pump shall develop not less than 65 percent of rated total head
when discharging at 1.5 times rated capacity.The maximum net
pressure for a fire pump shall not exceed 140 percent of rated
head.

3.The maximum pump brake horsepower shall not exceed the HP rating
its driver, including service factor.

• Product Details

• CERTIFICATE

​

SPICO ENDOSEMENT