Danfoss 131B0456 FC-302P4K0T5E20H1XGXXXXSXXXXA0BXCXXXXDX VLT AutomationDrive

Product Overview

The Danfoss 131B0456 is an exact VLT AutomationDrive FC 302 frequency-converter configuration identified by the complete type code FC-302P4K0T5E20H1XGXXXXSXXXXA0BXCXXXXDX.

This drive is rated for 4 kW / 5.5 HP and operates from a three-phase 380-500 VAC mains supply. It uses an E20 IP20 chassis enclosure intended primarily for installation inside an electrical cabinet.

The complete configuration includes an H1 RFI Class A1/B (C1) filter, graphical local control panel and A0 PROFIBUS communication option. It does not include a brake chopper, coated PCB or additional mains option.

Relevant procurement searches include 131B0456, FC-302P4K0T5E20H1XGXXXXSXXXXA0BXCXXXXDX, FC-302P4K0T5, Danfoss FC302 4kW PROFIBUS, FC302 5.5HP and VLT AutomationDrive FC 302 IP20.

Main Features

• Danfoss commercial reference: 131B0456
• Complete type code: FC-302P4K0T5E20H1XGXXXXSXXXXA0BXCXXXXDX
• Short search model: FC-302P4K0T5
• VLT AutomationDrive FC 302 product family
• 4 kW / 5.5 HP power rating
• Three-phase 380-500 VAC mains supply
• E20 IP20 chassis enclosure
• H1 RFI Class A1/B (C1) filter
• No brake chopper
• Graphical local control panel included
• Not coated PCB
• No additional mains option
• A0 PROFIBUS communication option
• No additional B, C or D option

Technical Specifications

Compatible System and Applications

The 131B0456 can be evaluated for conveyors, packaging machines, mixers, dosing equipment, winding systems and production machinery connected to an existing PROFIBUS automation network.

Communication compatibility must be checked against the installed PLC, PROFIBUS master, node address, baud rate, telegram profile, process-data mapping and original project configuration.

Final drive selection must also consider motor current, overload duty, required starting torque, acceleration cycle and installation environment.

Maintenance and Replacement Notes

For exact replacement, match both 131B0456 and FC-302P4K0T5E20H1XGXXXXSXXXXA0BXCXXXXDX.

The A0 PROFIBUS option is a major compatibility requirement. A standard FC-302P4K0T5 without the same communication option may not connect correctly to the existing control system.

This configuration does not include a brake chopper. Verify braking requirements separately before replacing a drive used with rapid stopping or regenerative loads.

Back up the complete parameter file and document the PROFIBUS address, process-data configuration, motor data, I/O assignments, ramp settings and safety parameters.

Related Models

Related exact configurations include 131B0040 for an H1 graphical-LCP version without the PROFIBUS option, and 131B0070 for an H2 brake-chopper version.

Products with different A-option codes must remain separate exact-SKU pages because the installed communication interfaces differ.

Inquiry and Supply Notes

Please provide the original drive nameplate, PLC type, PROFIBUS network information, motor data, required quantity, braking requirements and parameter backup.

Confirm whether the A0 PROFIBUS option and graphical LCP are mandatory.

Exact condition, hardware revision, included accessories, testing scope, firmware, warranty, packaging and delivery time must be confirmed before quotation.

Company Profile

DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide.

Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, hydraulic components, power supplies, electrical control devices, and industrial communication modules.

These products are used in CNC machinery, packaging equipment, robotics, production lines, water treatment systems, machine rebuilding, equipment maintenance, and other industrial automation applications.

We assist customers with model identification, part number verification, replacement part sourcing, quotation preparation, packing confirmation, and international shipping coordination. Before quotation, customers may provide complete model numbers, order codes, product photos, nameplate information, or technical specifications for verification.

For discontinued, legacy, or difficult-to-source components, we can also help check possible replacement options based on the exact model, hardware configuration, electrical specifications, communication interface, and application requirements.

Our objective is to provide clear product identification, practical sourcing support, reliable order handling, and efficient communication for industrial automation maintenance and spare parts procurement.

Service Scope

• PLC modules, controllers, and control system components  

• Servo drives, servo motors, and motion control components

• Variable frequency drives and AC drives

• HMI operator panels and industrial displays

• Industrial sensors, pressure measurement devices, load cells, and related components

• Pneumatic valves, cylinders, fittings, and accessories

• Hydraulic pumps, valves, cylinders, and control components

• Industrial power supplies, relays, contactors, circuit breakers, cables, and connectors

• Industrial Ethernet, fieldbus, and communication modules

• Legacy and discontinued automation spare parts

• Replacement part identification and model cross-checking

Industries Served

Our products and sourcing services support a wide range of industrial applications, including:

• CNC machinery

• Packaging machinery

• Robotics and automated equipment

• Factory automation and production lines

• Water treatment systems

• Machine building and equipment rebuilding

• Industrial maintenance and repair

• OEM equipment users

• System integrators

• Maintenance companies

• Industrial distributors

Why Choose DF Automatic

Model and Part Number Verification

We check model numbers, order codes, nameplate information, and product specifications before quotation to reduce the risk of incorrect part selection.

Support for Legacy and Discontinued Parts

We assist with sourcing older automation components and checking compatible or replacement options where applicable.

Efficient Quotation Support

Customers can send individual models or complete spare parts lists for quotation and availability checking.

International Order Coordination

We support packing confirmation, shipment preparation, and international logistics coordination according to order requirements.

Flexible Procurement Support

We can handle single replacement parts, urgent maintenance requirements, and larger industrial spare parts purchase lists.

Inquiry Information

For faster product confirmation and quotation, please provide as much of the following information as possible:

• Complete model number

• Part number or order code

• Product quantity

• Product photos

• Nameplate photos

• Required condition

• Technical specifications

• Existing machine or system information

• Destination country or shipping requirements

Important Note

Product availability, condition, price, lead time, configuration, and replacement options depend on the exact model number, part number, order quantity, technical requirements, and current supply conditions.

For products with multiple hardware versions, firmware versions, electrical specifications, communication options, or regional variants, the complete nameplate and order code should be confirmed before purchase.