The ball type anemometer is a great tool to catch wind gust. The
sampling rate is 1Hz which makes this device to be a proper
supplement for DynaRoot or DynaTree users or any other cases when
measuring wind gusts is essential.
The ball type anemometer can be used alone or on the top of one of
our poles or as part of DynaRoot or DynaTree systems.
- Assemble the anemometer in the vicinity of the tree(s) to be
- If you are using a pole attach the anemometer on the top, and erect
the tower. Wind velocity readings are sent to, and data is
collected at the data logger located at the bottom of the tower.
- Start recording data by pressing the START button located in the
- After the recordings are finished, transfer the acquired data to a
PC by removing the internal SD card or by switching the instruments
to Wi-Fi mode.
An instrument for measuring wind velocity at or near the tree to be
evaluated. The closer to the better, but, depending on wind
velocity DynaRoot may provide reliable data even with measurements
taken several kilometres/miles away. The anemometer provides wind
velocity data of sufficient frequency, Ideally the anemometer
should be clear of buildings or other objects that may obstruct the
wind, at a height of at least 10m.