Sign In | Join Free | My infospaceinc.com
infospaceinc.com
Guangzhou Xingyang Decoration Materials Co.,Ltd
Home >

Mould for gypsum product A2085 aluminium alloy mold-More standard

Mould for gypsum product A2085 aluminium alloy mold-More standard

Country/Region china
Company Guangzhou Xingyang Decoration Materials Co.,Ltd
Categories Aluminum Work Platform
Update 2018-03-31 02:13:10
ICP License Issued by the Chinese Ministry
Contact Now

aluminium alloy mold-More standard

Product name:aluminium alloy mold-More standard
Item:A2085
Details:
Aluminium alloy mold:for machine making and handmade cornice moulding

Handmake

vedio of gypsum/plaster cornice making by aluminum alloy mold

Process of gypsum cornice production
close-up of the mold:
Preparation 1materials should be prepared in advance:

aluminum alloy mold, scraper, worktable, water, glass fiber, gypsum powder, release oil, brush, shovel, agitation barrel (with volume of 11 liters), plastic rope

Preparation 2clear dirt from mold with a brush

10 steps to make gypsum cornice by using aluminum alloy mold:

Step1: brush a small amount of release oil on mold
Step2: pour water in the barrel and then put gypsum powder in it ; the ratio of water and powder is 1:1.5 ( it means a gourd of water , one and a half bailer of powder)
Step3: dissolve powder in water till no dry powder exists
Step4: stir powder and water into slurry (the speed should be fast ; the faster the better); Appearance of granular powder in slurry is not allowed.

Step5: after pouring slurry for the first time, touch the mold back and forth for twice (fingers should be placed on depressions) then pour slurry again
Step6: wash hands and then grab some glass fiber to spread on the mold evenly. After that, press glass fiber with slurry pouring on them
Step7: trim glass fiber in order to make them all be put on the centre of mold

Step8: tie up a pinch of glass fiber on the end of mold with a rope and flatten the surface

Step9: pour remaining slurry; smooth surface with a scraper
Step10: shovel plaster off the edge of mold. After 30 minutes later, gypsum cornice can be released from the mold

Production line machine by aluminium alloy mould

Plaster cornice production line/ making machine
Gypsum cornice moulding
pipeline
Used mold:aluminium alloy mold(120pcs mold for one production line)

One pc aluminium alloy mold cost:55 usd
It need 8 labours to operate/handle one production line

Production capacity for One production line:5000pcs cornice /day

Value of one production line:$200000


Production line for gypsum products
After 2 years hard-work on making the automatic gypsum products producing machine, Guangzhou xingyang decoration company finally achieved success in 2014, the machine have advantages as bellow: stable, low cost, good quality, high proficiency, energy-saving and manpower-saving.
By using this production line to produce gypsum products, we changed the situation of the whole industry related to gypsum products. Before we lack of technology, and the procedure is complicated, needs a lot manpower, wastes a lot of material, and low woking efficiency.

The main features of the machine:
1: High output: 2500—6000PCS per day

Product Tags:

gypsum plaster corner moulding

      

gypsum plaster cornice

      

plaster cornice mould

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

Mould for gypsum product A2085 aluminium alloy mold-More standard Images

Inquiry Cart 0
Send your message to this supplier
 
From:
To: Guangzhou Xingyang Decoration Materials Co.,Ltd
Subject:
Message:
Characters Remaining: (0/3000)