ODM Supported Manual Wire Harness Terminal Tension Tester Stand with 500N Rated Load
...testing. 2:This instrument has characteristics of compact device,accurately controlling, high testing accuracy, convenient specimen clamping, simple operation, etc. It is the ideal equipment for wiring harness factory to ensure product quality. EMH Terminal pull force tester is a kind of testing equipment......
Yihan (shenzhen) Automation Equipment Co., Ltd.
|
SOCAY 5000W 5KP Series TVS Diodes For Circuit Protection Axial Lead Transient Voltage Suppressor
... of sensitive electronic equipment from transient voltages caused by lightning and other transient voltage events that can be harmful to the equipment itself. Part Number Reverse Stand-Off Voltage VRWM (V) Breakdown Voltage VBR (V) @IT Test Current IT (mA...
Shenzhen Socay Electronics Co., Ltd.
|
3mm Impact Head Bending Test Equipment , CE Welding Bend Test Machine
...Bending Test Equipment Application This test equipment is suitable for testing mobile phones, tablets and mobile phone batteries. In the normal daily use of the simulated sample, test the degree of bending and damage to the sample caused by the impact, and use the test result as the basis for improving the strength performance of the product. Principle Place two acrylic round rods at a certain distance horizontally to support the test...
SKYLINE INSTRUMENTS CO.,LTD
|
IEC 60309-1 Vehicle Charging Interface Cable Bending Test Equipment With Load
...Bending Test Equipment With Load Product Overview For Vehicle Charging Interface Cable Bending Test Equipment: The flexibility testing apparatus is designed and manufactured according to requirements of IEC62196-1: 2020 clause 26.4 figure 20, IEC60309-1: 2012 clause 24.4 figure 9, etc. It is used to process the mechanical load flexing test......
Sinuo Testing Equipment Co. , Limited
|
IEC-60794-1-2 Standard Fiber Optic Cable Repeated Bending Test Equipment
... Test Equipment: Optical Fiber Cable Repeated Bending Tester is used to determine the ability of a fiber optic cable to withstand repeated bending (cyclic flexing). Optical Fiber Cable Impact Tester Series allows a cable sample to be bent backwards and...
Dongguan Wirecan Technology Co.,Ltd.
|
C60598-1 Clause 4.14.3 Bending Test Equipment For Adjusting Luminaire
Bending Test Equipment for Adjusting Luminaire Conforms to IEC60598-1 Clause 4.14.3 1. Introduction The bending test equipment for adjusting luminaire is designed to meet the test requirement of IEC60598-1 clause 4.14.3. The flexible cord or cable of adjusting luminaire shall have no more than 50% of the strands in a conductor be broken and no serious damage to the insulation after continuously bending......
Pego Electronics (Yi Chun) Company Limited
|
Cord Bend Test Equipment / Tensile testing machine 10 - 40 mumbers/min Speed
... cable forward to the center of the turnplate. Pull the cable vertically with load at rated bending speed, angle and times then to begin the bending test. When the tester stops automatically, check the jacket damage and the breakage rate of conductors....
Infinity Machine International Inc.
|
Bend Testing Equipment
...Bending Testing Equipment Product Description: The general swing tester can only be judged as unable to pass the test when it oscillates completely. It is different for this table load tester. When we set a certain current, it cannot withstand even if it is not completely shaken off. The set load current also fails the test......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Rubber Tensile Testing Machine High Precision Bend Test Equipment Universal Material Testing Machine
...Testing Machine High Precision Bend Test Equipment Universal Material Testing Machine HD-B609B-S Universal Test Machine.pdf Product Description: Tensile Test Machines are designed and manufactured according to ASTM, ISO, DIN, GB and other international standards. Applicable for wide range of material for tension, compression, bending, shearing and low cycle test......
Hai Da Labtester
|
High Temperature Tensile Testing Machine , Compression Bending Testing Equipment With Oven
High Temperature Tensile Testing Machine , Compression Bending Testing Equipment With Oven Application: Mainly applicable to metal and non-metallic materials testing, such as rubber, plastics, wire and cable, fiber optic cable, seat belts, belts, leather ......
Perfect International Instruments Co., Ltd
|