Double Casing High Pressure Slurry Pump , End Suction Mud Pump with
ZJ-series pump is a centrifugal pump, horizontal in the open, for
the transport of water and physical and chemical properties similar
to water in liquid, the liquid temperature should not exceed 80 °C,
suitable for factories, mines, power plants, city drainage,
drainage irrigation and water conservancy
1) Good passing ability:gravel pump max passing particles size is
2) Widely application: all slurry, mud and bad corrosive medium can
be transported, widely used in industry of mining, electrical
power, metallurgy,coal, construction etc.
3) High concentration, volume concentration reach to 60%, weight
concentration reach to 70%;
4) Comprehensive performance is good, high head: long distance and
high head transportion, single set head can reach to max 520m, and
can be used in series to satisfy much higher head requirements;
6) High flow rate capacity: can be reached 3400m3/h;
7) Diameter size:outlet size from 1" to 22"
- · Chemical Process
- · Heavy Minerals
- · Paper and Pulp
- · Mill Discharge
- · Sugar Beet
- · Slag Granulation
- · Bottom Boiler and Fly Ash
- · Cyclone Feed
- · Power Plants
- · Other industry
|Inlet Size:32mm~400mm||Allowed Max Particle Size:20 mm|
|Capacity:4 ~ 3000 m³/h||Seal Type:step-down dynamic seal|
|Head:10 ~ 130 m||Pump Weight:up to 3000kg|
|Maximal Efficiency:70%||RPM:1450 r/min|
Clear Water Performance
Rotating speed n
Shaft power (Pa)
Product introduction, technical exchange, non-standard product
design, problem explanation.
1. Honoring contracts, ensuring on-time delivery, keeping contact
with users at any time.
2. For special or complicated [products, arrange persons to provide
the users with training and guidance at the product use,
troubleshoot, adjustment and repair.
1. Offer a warranty for 12 months from the date of ex-works, with
return, replacement and repair available.
2. During the use of products, carry out a periodic organization of
the personnel in charge of the technique, quality inspection and
service to contact the users to get the feedback on the quality,
conditions of use, comments on improvement etc. so as to further
enhance the quality.
1. Q: Are you a manufacturer or trading company?
A: We are a manufacturer established in 1995, professional
manufacturer of chemical-process pump and energy-saving mixer with
more than 20-year experience.
2. Q: What's your delivery time?
A: The batch order will be shipped within 40 working days after
3. Q: What's your warranty service policy?
A: 12 Months for all products, and some products warranty is
4. Q: What information I need to offer for quotation?
A: Medium: ____________ PH: ________
Specific Gravity: _______ Temperature: _________
Capacity/Flow: ________m3/h Head: _________m
Voltage: ____________V Frequency: _________Hz
5. Q: What is your minimum quantity?
A: One set is also welcomed to us.