Sign In | Join Free | My infospaceinc.com
infospaceinc.com
Products
Search by Category
Home > Batteries >

Custom 60AH Deep Cycle Battery , High Power LiFePO4 Rechargeable Battery Pack

Categories UPS Battery Pack
Brand Name: VICT
Model Number: VS4860LFP
Certification: CE.RHOS
Place of Origin: CHINA
MOQ: 1 PACK
Payment Terms: L/C, T/T, Western Union
Price: Negotiable
Supply Ability: 100000 Unit per day
Delivery Time: 15 days
Packaging Details: cartons + pallet
Product Name: ups battery replacement
Battery Module: 48V 60Ah
Life: 3000 (more than 80%)
Discharge Temperature: -20°C ~ 55°C
Outer Case: Metal with IP65
Discharge Current: up to 50A continuous
Single Cell Type: 10Ah
Operation Voltage of Battery Pack: 51.2 V (3.2 V for cell)
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Custom 60AH Deep Cycle Battery , High Power LiFePO4 Rechargeable Battery Pack

    48V 60Ah UPS Battery Pack , High Power Deep Cycle Rechargeable Battery Pack


    Overview
    Battery modules are assembled with well-prepared battery pack, builtin BMS / PCB (protection circuit board) and metal box as a whole
    system. Customer can parallel config the modules to increase capacity or series config the modules to increase the voltage, but should follow
    the instructions of engineers suggested.


    Specifications

    Battery module Type48V 60Ah LiFePO4 Battery Module
    Dimension (L*W* H)350*220*260mm
    Weight≤ 28 Kg
    Single cell type10Ah
    Operation Voltage of battery pack51.2 V (3.2 V for cell)
    Charging Voltage of battery pack58.4 V (3.65 V for cell)
    Discharge Cut-off Voltage, battery pack36.8 V (2.3 V for cell)
    Charge & discharge Terminals

    S-type: 2 terminals

    D-type: 4 terminals

    Charge currentup to 10A continuous
    Discharge currentup to 50A continuous
    Max peak discharge currentup to 90A within 30 seconds
    Charging temperature0 °C ~45 °C

    Working temperature

    (Inside temperature of module)

    -20°C ~ 55°C
    Recommended working temperature15 °C ~45 °C

    Charge and Discharge Curve


    Remarks


    Different current needs different BMS, so please secify the charge / discharge current for module customize, also the cost of module will have slight difference on BMS selection.Here are two kinds of terminal output, S-type and D-type. S-type will only offer 1 set of wire with 2 leads as "+" and "-" for both charge and discharge. D-type offer 2 sets wires, each wire has 2 leads of "+" and "-", 1 set for charge and another for discharge. S-type cost is higher than D-type.


    Quality and Guarantee


    For our lithium batteries, we assure do safety test as below to guarantee good quality.

    • Impact test, a cell is to be placed on the impact flat. A Φ15.8mm bar is to be placed on the center of the cell. A 9.1kg weight is to be dropped from a height of 610mm onto the cell, the distortion is allowed. No fire, no explosion.
    • Crush test, a cell is to be placed on the crush flat, the axis is parallel to the crush flat, It is to be crushed between two flat surfaces. Crushing force is approximately 13 KN and hold for 1 min. No fire, no explosion.
    • Heating test, a cell is to be heated in a circulating air oven. The temperature of the oven is to be raised at a rate of 5℃±2℃ per minute to a temperature of 130℃±2℃ and remain for 30min at that temperature before the test is discontinued. No fire, no explosion.
    • Nail penetration Test, a cell is to be penetrated completely the center of the largest side at the speed of 20-40mm per second by a Φ3.0mm stainless steel nail. No fire, no explosion.
    • Short-circuit test, a Cell is to be short-circuited by connecting the positive and negative terminals of the cell with copper wire having a maximum resistance load of 50mΩ. Monitor its temperature while testing, the cell is to be discharged until the cell case temperature has returned to be 10℃ less then peak temperature. No fire, no explosion.
    • Overcharge test, a cell is discharged to cut-off voltage at CC of 0.2C. Then it is to be subjected to CC/CV power by connecting its positive & negative terminal, then set the current as 3C, the voltage as 10V, after that, charge the cell up to 10V at CC of 3C, until that last 7h at the voltage of 10V or the voltage is no more increased. No fire, no explosion.
    Buy Custom 60AH Deep Cycle Battery , High Power LiFePO4 Rechargeable Battery Pack at wholesale prices
    Send your message to this supplier
     
    From:
    To: Hunan Vict-Sailing Power New Energy Co.,LTD
    Subject:
    Message:
    Characters Remaining: (0/3000)
     
    Find Similar Products By Category:
    Inquiry Cart 0