Wear Resistance Belt Bucket Elevator Cement Transportation Elevator
Bucket elevator conveying dry product or solid product from low to
high, supply automatic continuous conveying operation.
At the top of the conveyor, the bucket rotates over and dumps the
product out. The bucket then travels down the back side of the
frame to be filled again. A bucket elevator has two chains which
carry the buckets. The buckets are closely spaced together allowing
for a nearly continuous flow of product.
Adjusting transfer speeds could up and down conveying capacity.
Lifting height is selected as your Location design request.
1. The elevator and electronic metering scale shall be used
together,control circuit is used to control the position of the
material,realizing automatic feeding and stopping function.
2. The elevator is made of stainless steel.
3.Bucket elevator adopts inflow feeding, gravity induced discharge,
and use large capacity hopper.
4.The traction parts adopt wear-resistant chains and steel wire
belt to extend the service life of the traction parts.
5.Bucket elevator runs smoothly, generally the lifting height is
40m or even higher.
6. Multiple discharges can be pneumatically controlled.
7. Vertical lifting can save floor space, and power loss is small,
because the accumulation of material in the bucket, has been in a
relatively static state during transport, it is not caused by
Bucket elevator conveyor is designed for vertical transport powder,
granular materials and small block and small materials such as
grinding: coal, cement, stone, sand, clay, ore or dry mortar and
other industries, for construction, chemical and food stuff.
Widely applied in vast industries like metallurgy, chemical
industry,building materials, mine, grain and vegetable oil, food,
fodder, plastic and medicine.
|Model||Capacity (m³/h)||Bucket capacity (L)||Pitch between buckets (mm)||Speed of bucket (m/s)||Size of material (mm)|
How to choose bucket elevator for you? Tell us the followings
1. What's material will be transported by bucket elevator? And the
density of material? also the temperature of material? and its
2. How high is bucket elevator you need?
3. How much about the capacity of bucket elevator you need? 10t/h,
If there's anything I can do for you, Don't hesitate send us an