49.2hp 100kN Hydraulic Puller For Underground Cable Pulling Machine
Hydraulic puller is suitable for laying underground transmission
cables and optics fiber cables, it is driven by a diesel-hydraulic
power unit that is completely enclosed within an area of coverage,
limiting noise emissions.
|Max pull force||100kN|
|Continuous pull effort||80kN|
|Max speed at Continuous pull||17m/min|
|Pull at max speed||15kN|
|Maximum cable diameter||80 mm|
|Overall dimension (length*width*height)||4000*2200*1800mm|
|Diesel||Yanmar Japan 49.2hp/36kw|
|Hydraulic motor||Rexroth German|
|Hydraulic meter||Wika German|
|Operating handle||Bondioli & Pavesi Italy|
|Hydraulic valve||Sun USA|
Anti-twist Steel rope
We can customize the size and length as your request.
Control panel with instruments for hydraulic system and engine.
A dynamometer used to check pull values
Hydraulic oil cooling system
In the case of over pull, the preset for maximum tension can stop
The hydrostatic loop, which allows the puller to continue to change
speed in two rotational modes, can operate only one command
Hydraulic emergency brake operates automatically at the center of
the instruction bar or in the case of hydraulic failure (not
suitable for lifting)
Mechanical front and rear stabilizer
Grounding connection point
Large channel steel capstan with anti-skid device
Closed hydraulic circuit for step less speed variation in both
rotating directions. This machine is provided with a pull
pro-setting system that maintains the pre-set pulling value (also
when the speed is reduced to "0") by automatically adjusting the
operation speed according to the friction and unexpected loads
which may occur.
Lighting system for the trailer
Swivel guide rope roller
Chassis, with damping shaft, tires, traction lever, Trailer for
towing at max speed of 30 km/h
Digital speed and meter counter (extra charge)
Accessories for anchoring and lifting
The heat exchanger cools the oil in the hydraulic circuit
Rear tension roller with hydraulic drive
Established in 2016, Galaxy Power Industry Limited. is a
manufacturer specialized in the research, development and
production of Electric Power Machinery. We are a high-tech
enterprise in China. All of our products comply with international
quality standards and are greatly appreciated in a variety of
different markets throughout the world.
Our products sell in Australia, Turkey, Mexico, Panama, Peru,
Brazil, Egypt, Sudan, Kenya, Angola, Pakistan etc. Our products are
also very popular and best-selling in china.
1. Main configurations of our machine are from Germany and USA
Engine: American Cummins Main pump: German Rexroth Main motor:
German Rexroth Speed reducer: German Rexroth Tail bracket hoisting
motor: American Eton Hydraulic meter: German WIKA Operating handle:
2. We have one year quality guarantee. if internal components go
wrong within one year, we will change another for free.
3. We can supply the specific components to the buyers with cost
price after warranty period.