Categories | Plastic Roof Tile Making Machine |
---|---|
Brand Name: | ACEMIEN |
Model Number: | ACMT01 |
Certification: | CE,ISO |
Place of Origin: | P.R.China |
MOQ: | 1 set |
Price: | USD60000-120000 |
Payment Terms: | L/C, T/T |
Supply Ability: | 20 sets per month |
Delivery Time: | 60 days |
Packaging Details: | Wood case and film wrapped |
Extrusion Capacity: | 550kgs/hr max |
Total Power: | 160KW in actual production |
Voltage: | 380V 50Hz 3P or customized |
Total Machine Weight: | 13-26MT |
Max linespeed: | 4m/min |
Temperature control: | Thermalcouple |
Tile width: | 720mm,880mm,1040mm or customized |
Forming mould: | 22/32/36/40/42 pairs of mould |
Extruder features: | Pressure&Temperature Warning |
Tile thickness: | 1.5-3mm for basematerial, for ASA layer 0.1mm |
Material Mixer: | SRL 300/600, max hourly 600kgs mixing capacity |
Forming machine cooling: | Compulsary air cooling |
Tile Cutter: | Servo motor and PLC control with saw dust collector |
Machine Packing: | Seaworthy Package |
Warranty: | 120 months |
Tile Layer: | 2/3/4 layers |
Filler material: | Calcium Carbonate |
Transformer Required: | 200-400KWA |
Inverter: | ABB or Holip |
Motor: | Siemens, WEG |
Quick tips on PVC ASA roofing
The plastic PVC ASA roofing refer to a new composite roof tile
products, which is mainly made by plastic extrusion and forming
machine.It has various pattern of appearance(like circular, rapzoil
shape,and also glazed shape) and colors, but is much cheaper than
other tiles made of ceramic, clay and metal in same square meters
of roofing coverage.
At the same time, the plastic roof tile will not have any problem
for the environment, instead, using a group of plastic sheet
recycling machine which we also called plastic auxiliary machine
such as plastic sheet crusher and miller, the waste of damaged
roofing sheet can be recycled to feed the production line again as
the middle layer to save the cost. Meantime, the filler material
used in plastic roofing products is calcium carbonate which is very
cheap and available almost anywhere, and it costs USD100 per ton.
PVC ASA Plastic Roof Tile Extrusion Line
The bestseller machine in Acemien factory is the plastic roof tile
machine, due to its outstanding performance of the products and
machines, these roof tiles are very popular across the world, here
we explain the production line by three steps as shown below:
1,Raw Materials preparation
Using our high efficient reliable vertical raw material mixer, the
raw materials such as PVC powder,Calcium Carbonate, and other
additives like cloride PE, pre-wax, stearic acid, compound
stabilizer, ACR, Paraffin are mixed together and homogenized, which
is very important in sheet making, because the improper mixing
would lead to product deficiency problem like crack, bubble and
bump.
2,Co-extrusion for multi-layer
In this stage, the completely mixed raw materials are transported,
molten and fully plasticized, and then transferred to the sheet die
mould due to extruder pressure caued by rotating screw, where the
sheet thickness can be adjusted between 1mm to 3mm through screw of
mould lips, finally the ASA coating layer is formed on the surface
of roof tile.
3,Forming and cutting
In the final stage, the hot PVC ASA sheet is tracted to the tile
forming machine with glazed mould after trimming, in which the wind
generated by the cooling fan at both side will blown into a tunnel
to cool down the temperature for the glazed mould after absorbing
the heat from the running hot roof tile sheet, and then the formed
glazed PVC tile sheet continues to be tractedto a cutting machine,
where a certain length of the glazed roof sheet is cut as per PLC
programmed, and finally the glazed roof sheet are piled on the
stacker table which is ready to be packed.
2 Layer Plastic Roof Tile Detailed Machine List
No | Machine | Technical specifications |
1 | SJZ92/188 conical twin-screw extruder | Extruder with double screw feed Screw vacuum with double vacuum Five-zone heating Joint venture brand instrumentation Bimetallic treatment screw |
2 | SJZ65/132 conical twin-screw extruder | Extruder with double screw feed Screw vacuum with double vacuum Four-zone heating Joint venture brand instrumentation Bimetallic treatment screw |
3 | SJ50/30 single screw co-extruder | Bimetallic treatment screw |
4 | Extrusion mould | Clothes hanger channel Mirror polishing Cr plating Three dimensional flow simulation software design |
5 | Embossing roller | Hard chromium plating on surface Design of spiral flow passage in roller Motor separately drive to ensure consistent speed |
6 | Forming machine | The module is a one-time die-casting molding Module material LY12 high quality aluminum Advanced machining center,one-time clamping of the module Four cylinder lift more stable |
7 | Cutter | Special positioning device to ensure the cutting accuracy Downside the knife cutting mode running smoothly PLC HMI operation,serve motor |
8 | Oven | Double door double control, upside and downside at the same time
operation Flat open the door, the insulation effect is good and to prevent burns Accurate temperature control is in 1 degree |
PVC ASA roof tile advantage
1,Anti-corrusion,will not rust like the iron or metal tile.
2,It works for 25 year.
3,Easy to install and transport.
4,Heat resistant due to low conductivity of the roof sheet.
5,Used As durable weather sheet, and also for counterpart of wall
panel sometimes.
6,Noise proof when it rains and winds.
7,Heavy load bearing even to heavy snow,rain and falling objects,
strong enough to hold against Typhoon.
8,NOT leaking.
9,Nice appearance with bamboo shape.
10,Environment friendly, can be recycled by plastic crusher and
miller to be reused to extrude middle layer ,then to reduce
manufacturing cost.
11,Anti Ultraviolet.
Plastic roof tile machine advantage from our factory
1,As company best seller machine, we are improving the design and
providing better machine for our customers all the time.
2,We have APP insert for safety and temperature warning and
extruder pressure control.
3,Our production line of pvc roof tile is designed for nice
appearance and running in steady status,we own several domestic
patents.
4,We have economic and special formulation for roof tile production
as per you local market situation.
5,We committed to provide technical support for production line
during machine’s all life time.
6,Our engineer are experienced enough for installation and
debugging.
7, 15 Years’ Experience for R&D group.
After sales service and policy
1. Arrangement for inspection, installation and testing work
a. After all machines are delivered to customer's factory; Buyer is
responsible for all preparation work, e.g. electricity supply,
water supply, labors and cranes, etc.
b. ACEMIEN will prepare for visa application for their engineers,
who are responsible for guide of machine installation and testing
at the Buyer's factory.
c. The Buyer will buy the round-trip air ticket for Engineer if
visa application is approved. The buyer is also responsible to bear
expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80
per day for each engineer.
d. Engineer will give free training lessons to labors in buyer's
factory.
e. If buyer doesn't request installation and commissioning by
Seller's engineer in 4 months since date of bill of lading, which
to be accounted all the machines has been successfully tested by
buyer.
2. Quantity and quality guarantee
a. Quantity/Quality Discrepancy to destination port during
transportation:
In case of quality/quantity discrepancy to destination port in
transportation, customer should file claim within 30 days after the
arrival of the goods at port of destination. Insurance company and
shipping company will be responsible for any discrepancy of the
goods caused by shipping company and other transportation
organization and/or post office.
b. Guarantee period and after-sales services: 12 months since date of
bill of lading
During this guarantee period, ACEMIEN will provide spare parts
without any charge in case of quality discrepancy caused by us. If
the malfunctions are caused by your incorrect operations, ACEMIEN
will provide the buyer spare parts at cost price.
c. Long-term service:
ACEMIEN will charge the buyer cost price of spare parts beyond one
year and provide long-term technical guide.