Water Quality Testing Pen TDS Pen with Titanium Alloy Probe Water
1. Description: Water Quality Testing Pen TDS Pen with Titanium Alloy Probe Water
|Battery life||one DC3V or CR2032, more than three years|
|Size||Color box: 2 * 6.1 * 18.6 cm|
|Ideal test environment||The water was allowed to stand at room temperature|
|Applicable Industry||Swimming pool, water plant laboratory, CDC, aquaculture, hospitals,
3. Health Tips
0-50: mineral water
50-100: barely acceptable tap water
200-400: Poor state
400-500: U.S.EPA the maximum level of pollutants.
4. Healthy drinking water temperature: 35-38 ℃: the temperature closest to the human body temperature.
For hot drinks, the optimal temperature of red honey water 50 ℃;
hot milk, hot soup, etc. at 60 ℃, the best taste. In any case,
drinking water and eating food temperature, are never more than 60
℃. For cold drinks, soft drinks at 5 ℃ most delicious.
Water testing pen TDS used to test the water, also known as the
total dissolved solids, measured in units of mg / L (mg / L), it
shows that 1 liter of water dissolved in the number of milligrams
of soluble solids. The higher the TDS value, the more impurities
are present in the water. To determine the purity of water, both
the test water temperature and ambient temperature function, can be
applied to the family, home tourism, the wild as a drinking water
quality inspection tool.
1), press the ON / OFF, turn on the power, LCD display the default
ppm water quality of total dissolved solids value.
2). Press the MODE key to select the test function. Select ppm,
Celsius, Fahrenheit, F
3). After the test item is selected, the test will be performed
automatically and the reading will be automatically locked after
the data display. Clear after the insertion of water can display
the reading, according to different water quality shows the
corresponding TDS value, if the manual lock can press the CLEAR
key. To retest, press the CLEAR key and enter the retest.
4), do not start the new operation after the action test pen will
automatically shut down after 60s.
5), continue to press ON / OFF / HOLD key 3s, can be manually
6), the use of finished, clean test head, properly stored.
7.Product Selling Points
1), can remind the health of the water quality and health of the
appropriate drinking water temperature
2), can prevent and detect water safety, water purity at any time
3), the test water temperature and ambient temperature
4), full penetration LCD large screen display, easy to read
5), High-precision process, detection precision, waterproof design,
6), simple, one-click to use