Magnesium anode for pressurized Water tank, cleaning for solar
Water heater anode rod or sacrificial anode is the important component part with only one
purpose to protect metal tank from corrosion.Extruded Alumnium
anodes and Magnesium anodes have high current to weight ratio,are
suitable to be used in where a small diameter anode is required to
give enough cathodic current.
HB supply extruded anodes in both high potential (Mg-Mn alloy),standard potential (AZ31 alloy) and Alumnium Alloy.Our extruded anodes are typically suitable for
all kinds of water storage tanks or in prepolarization of offshore
structure and so on.
|Zinc||0.60-1.40%||- -||4.00-5.00% Max|
|Calcium||0.04% Max||- -||- -|
|Silicon||0.10% Max||- -||0.25% Max|
|Copper||0.01% Max||0.02% Max||- -|
|Nickel||0.001% Max||0.001% Max||- -|
|Fe||0.005% Max||0.03% Max||0.25% Max|
|Sn||--||- -||0.05-0.25% Max|
|Other purity(each)||--||0.05% max||- -|
|Total purity||0.30% Max||0.30% Max||0.15% Max|
Dimension and Weight
|Diameter(inch)||Core eccentric(inch)||Core diameter(inch)||Straightness(inch/2 ft length)||Weight(lbs/inch)|
|Magnesium Extruded rod|
|Aluminum Extruded rod|
Magnesium anode for non pressurized Water tank, cleaning for solar
Thread Size: DN20
Length: 23CM(Exclude the copper fitting)
Mainly used in water boiler, heat exchanger, evaporimeter, and
boiler and so on. It has properties of softing water, de-dirt
residual ,en-longing the working life of container
Cleaning: Magnesium alloy sacrificial anode formed one power plant and
electromagnetic vibration by current in the container or piping.
Physical structure of the salt in water (mainly Calcium carbonate)
change to Sparse flow-like. If there is already thick scale in
container or piping, then the scale will be impacted and cut off by
Here is the installation picture as below:
13.5cm Shank Length M6 5.7mm Male Dia Magnesium Anode Rod for
(2)protect water heater, water containers of steel structure,
(3)protect the gas pipeline in-home service polarization high
resistance electrolytes (soil and water in the steel structure)
China High Broad New Material Co.,ltd was established in 2006 and
we are specialized in
manufacturingMagnesium/AluminumExtrusion/casting products. The
range of our product line, excellent quality & service, low
price over the past ten years have made us one of the leading
companies of its kind in China.
It’s our principal aim to provide the highest quality of materials
and integrity of services, so our customer can focus all of their
efforts in the more profitable services such as design, Marketing.
Taking advantage of the advanced technology and low labor cost,
high broad is always able to provide high quality products and
integrity customer services backed with the most competitive price.
Please select us as your honest and reliable partner to save your
money and time.
Factory occupation 55000 square meter
Total staff 220
Management & Technical staff 50
- Magnesium Casting: 5,000 tons per year
- Magnesium Extrusion: 3,000 tons per year
- Aluminum & Zinc casting: 3,000 tons per year
- Aluminum & Zinc extrusion: 5,000 tons per year
All communication is handled through emails and ALI message. We
strive to answer all emails as quickly as possible.