1/4 " X 3/4 " Nylonmushroom Head Concrete Anchors With Stainless
Steel Screw In Drywall
The Nylon Nail Anchor has a low-profile finish, is corrosion
resistant, and is quick and easy to install. This one-step
installation allows for the anchor to be placed through the object
to afix, and then hammered into the pre-drilled hole. Three head
styles are available: Flat, Round and Mushroom. Available in
diameters 3/16" and 1/4".
2. Product Specifications:
1. Name: nylon hammer anchor nail screw, nylon nail anchor
2. Grade: C10B21, C1022,
3. Size: M5x30--M10x220
4. Standard: DIN ISO
5. Certification: ISO9001, SGS, CTI, ROHS
nylon hammer anchor with nail screw
stainless steel, carbon steel, alloy steel, brass and so on
zinc, black phosphate, gray, decramet, HDG, ruspert, nickel and so
DIN GB ISO JIS BA ANSI
C10B21, C1022, SUS201, SUS304, SUS316, A2-70, A2-80, A4-80, 4.8 6.8
8.8 10.9 12.9
full thread, partical thread
plastic, nylon PA and PE
3. Benefits & features:
- One-Step installation
- Anchor size = Hole size
- Fast and easy to install
- Corrosion resistant
- Not recommended for overhead installation
- Zinc plated nail Or stainless steel nail
- Rush resistant nylon body
- Driving nail expands the anchor
- Works well in vibratory loads
What is a nylon nail anchor?
Nylon nail anchor are light duty, drive type expansion anchors.
They come preassembled and are ready to be installed. Once the nail
is set in the anchor body, it is tamper resistant.
When should I use one?
These can be used for light duty fastening in many materials,
including concrete, block, and brick.
What materials are used to make these anchors?
The body is made of a rust resistant material called polyamide
nylon. The nail is available in either zinc plated carbon steel or
Is this nail anchor available with a stainless steel nail?
Yes, it can come with both carbon steel and stainless steel nail.
What styles are available?
These are available in three head styles: flat countersunk, round,
What sizes of nylon nail-its are available?
It is available in two different diameters: 3/16” and 1/4”. The
3/16” diameter is available in lengths of 3/4”, 1”, and 1-1/2”. The
1/4” diameter is available in lengths of 1”, 1-1/2”, 2”, and 3”.
Can I use them in very wet environments?
The body will not rust. If the nail is zinc plated carbon steel
then it will rust, but the aluminum nail and the all-nylon nail
will not rust.
Can I install one for an overhead application?
No, they should not be used for overhead installations.
5. More pictures:
NYLON HAMMER ANCHOR