Categories | Nylon Nail Anchor |
---|---|
Brand Name: | crever |
Model Number: | M5x30--M10x220 |
Certification: | ISO |
Place of Origin: | Jiangsu,China |
MOQ: | Negotiable |
Price: | Negotiable |
Payment Terms: | T/T, L/C, D/P |
Supply Ability: | 200 ton per month |
Delivery Time: | 20-30 working days |
Packaging Details: | bulk packing, small box packing, packing as required |
Name: | nylon nail-in anchor |
Colour: | yellow, gray, blue and so on |
Material: | PA and PE |
Thread: | full thread, half thread |
Packing: | bulk packing, small box packing, plastic bag packing |
Head Type: | flat head, round head, mushroom head |
Company Info. |
Suzhou Crever Fastener Co., Ltd |
View Contact Details |
Product List |
Countersunk Head Nylon Nail Anchor , M5 M6 30mm 40mm Half Thread Nylon Screw Plug
1. Specifications:
1. Name: nylon hammer anchor nail screw, nylon hammer fixing anchor
2. Grade: C10B21, C1022, SUS201,SUS410,SUS304,SUS316,A2-70,A2-80,A4-80
3. Size: M5x30--M10x220
4. Standard: DIN ISO
5. Certification: ISO9001, SGS, CTI, ROHS
3. Production Details:
Description | A fastening system which consists of two parts: (1) a nylon piece similar in design to a blind rivet which has a cylindrical shank spliton two sides, 180° apart, extending from the bottom of the shank up most of the distance to the head. The shank has several ribs extending completely around its circumference. Mushroom, pan and flat head styles are available; (2) a steel pin expander which passes through a concentric channel extending from an opening in the top of the head of the nylon piece down into the shank to a point just below the spot where the split ends below the head. The pin has a slot across the top of its head, a chiseled point similar to a nail, and threads on its own shank which helps to lock the anchor in place upon installation. | ||||||||||
Applications/ Advantages | Installation is achieved by inserting the end of the nylon shank
into a pre-drilled hole and hammering the head of the nail until it
meets the head of the anchor body. Driving the nail through the
body expands the split ends which allows the ribs to grip the wall
of the prepared hole. This is a light duty anchor for use in solid
materials such as concrete, brick and block, preferred when
fixtures must be attached without chipping the fixture or the
masonry. Can also be used like a toggle bolt in wallboard or
plaster, or as a blind rivet in joining several thicknesses of material together, especially in applications subject to vibration. The nylon withstands temperatures from -40°F to 170°F | ||||||||||
Material | Body: Injection molded thermoplastic nylon Expander Pin: AISI 1018-1021 or equivalent cold rolled steel, zinc plated | ||||||||||
Anchor Spacing | Anchors should be spaced 18-24 inches apart (measured from the center of the anchor) | ||||||||||
Minimum Hole Depth | Hole should be drilled to a depth of at least 1/4" deeper than the required embedment. Likewise,the thickness of the base material should be at least 125% of the embedment to be used. | ||||||||||
Tensile Strength | Nylon nail anchors shall not be removable or show evidence of failure when subjected to axially applied proof test loads as specified in the above table when set in concrete of 3000 psi. compressive strength. The suggested safe working load is one-fourth the loads shown in the above table. | ||||||||||
4. More pictures:
NYLON NAIL ANCHOR, PIN DRIVE ANCHORS