Automatic pipe bending machine of heavy duty optional applying to
-- Brief introduction
This type of pipe bending machine is a three-dimensional bending
machine that uses servo control for feeding and rotating. The
accuracy of the two-axis control is greatly improved. All program
writing and input are directly performed on the conversational
touch screen; all information descriptions can be freely selected
to be displayed in Chinese or English, and the operation is
convenient and fast. Used in mass-produced or standardized products
such as automobiles, exhaust pipes, bumpers and other
three-dimensional pipe products.
-- Operating system instruction
Automatic mode interface. The automatic mode is that after the
equipment has been manually adjusted (including mold, function, and
parameters), the equipment can automatically carry out mass
production of tubes.
1. File Name: Displays the name of the currently machined workpiece
2. A total of several bends and several bends, showing the
effective number of bends and the current number of bends required
for automatic bending.
3. Set value: Shows the value of Y feed, B corner, and C elbow in
the fitting programming.
4. Current value: current Y feed, B corner, C bend value.
5. Elbow timing: The time taken for a tube to pass from the tube to
completion of processing.
6. The preset output sets the number of pipes to be processed; the
current output shows the number of completed pipes; it helps the
user to master the production schedule. Press Zero to zero the
7. Before the automatic operation, you must first press the "Start"
button, then follow the text prompts at the bottom of the interface
to start the foot switch. If you need to pause during automatic
operation, you can press the “pause” button or pause the foot
switch, and then press “pause” or pause to stop the pedal switch to
continue running. If “decomposition action” is ticked, the foot
pedal must be pressed to start the next action every time you
complete a step in the automatic operation.
8. In this interface you can switch to manual mode, single-bend
mode, file management, I/O mode, or back to homepage (open machine
-- Mechanical features
1. Decomposition action can be collected at the time of actual
bending so as to observe interfere points, amend movement and
2. Automatic recognition of power in machine work piece, processing
both quick and good.
3. Slow returning core, boosted by barrow, improving the appearance
of the angle.
4. Display of the whole process of operation in Chinese or English,
and 15 inches true color monitor and touch screen to make simple,
quick and correct programmes.
5. Rebound test, comparison test on the features of lots of pipe
6. Single step debugging function, a careful observe on the
deformation of the pipe material during the trail manufacture of
7. Over-all inspection, hydraulic/electrical circuit/driving
systems, absence of phase in motors/inversion, voltage,
temperature, oil pressure and automatically diagnose the troubles.
-- Main application
Adapted material: steel pipe, stainless steel, copper pipe,
aluminum pipe; rectangle pipe, square pipe, round pipe, etc..
House structure, shipyards, automobile production, industrial
pipeline equipment, pulp, paper, chemicals, boilers, pump stations,
site fresh water and wastewater systems, municipal heating and
cooling systems, urban gas pipelines, municipal works such as
hospitals, office buildings, construction and large-scale public
buildings, medium and large-scale industries for maintenance and
repair work, power stations, installation companies, automatic fire
sprinkler systems in front of workshops.
-- Specifications of machine
|Maximum applicable carbon steel pipe||Ø38.1*2.0t|
|Maximum applicable stainless steel pipe||Ø31.7*2.2t|
|*Maximum feeding length||2050mm|
|*Maximum coring length||2950mm|
|Feeding mode||Clamping feeding|
|*Maximum bending radius||200mm|
|Maximum bending angle||190°|
|*Settable bending angles of each pipe fitting||36|
|Main motor power||5kw|
|Maximum oil pressure||12MPa|
-- Packaging and service
1. Payment terms: 30% T/T down payment and 70% T/T before shipment.
2. Delivery time: No later than 15 days since receiving the advance
3. Validity of the price: For ONE month.
4. Package: Wooden case.
5. Warranty period: We guarantee machine quality for 12 months.
During this period, if spare parts of the machine were damaged, we
can send the component to the customer by international express
-- Pictures of machine