Automatic tube bending machine with multi layer mould for wheel
-- Description of machine
The pipe bending machine adopts advanced industrials computer
controller and touch screen. It is full-auto and stereo CNC bending
machine with the collecting machine, liquid and electricity to
integrate. This series uses the VDU touch screen panel control and
it can input, store and display various pipe data and instructions.
Three moving coordinate of the machine which is Y, B and C and
under the program control of the controller. This machine can bring
about automatic mandrel of coreless type fast bending. It has the
functions of revising the pipe bending compensation and alarming
for the fault signal. It is a European style bending equipment
which is professional, high-speed, and economical. CNC pipe bending
equipment has the advantages of low price and convenient use, and
it occupies the leading position in the domestic bending machine
market. CNC pipe bender can bend the pipe under cold state (single
mode) or two bend radius (double modes). It is widely used in the
bending of various pipes and wires in the automotive and air
-- Operating system instruction
1. Turn on the power to enter the boot interface. The boot
interface mainly displays the company's relevant information
(including the machine model, manufacturer, manufacturer site
Site and its contact information, system date and time, etc.). The
user can log in to operate the system.
2. Manual mode interface
2.1. Control the start and stop of the oil pump.
2.2. After the oil pump is started, press the corresponding button
to manually control the main clamp, guide clamp, mandrel, auxiliary
pusher, material rack, catch mode, bend axis action. In order to
enter the core, it is necessary to return the main clip, guide
clip, and bent arm to the original point.
2.3. In the interface can be switched to automatic mode, parameter
settings, fittings programming, I / O mode or return to the home
2.4. Manually rotate forward and reverse the corner shaft. Such as
"corner jog" tick, forward or reverse button press and hold. To do
so, release the corner of the button and stop. Corner angle and
speed can be set individually.
2.5. Manually advance, retreat and return the feeding axis. If
"Feeding Jog" ticks, forward or back button
When you press and hold, the button stops and the cart stops. Feed
length and speed can be set individually.
2.6. In this interface, you can switch to single-bend mode,
automatic mode, file management, I/O mode, or return to the
3. Single bending mode interface. The single-bend mode allows the
equipment to automatically perform single-bend mass production of
pipes, after the parts of the equipment have been manually adjusted
(including molds and parameters).
3.1. File name: The name of the processed workpiece number, which
can be set in Chinese, English or numbers.
3.2. Setting value: Angle set by C elbow.
3.3. Present value: Current angle of C bend.
3.4. The preset output sets the number of pipes to be processed;
the current output shows the number of completed pipes; it helps
the user to master the production schedule. Press Zero to zero the
3.5. Before the automatic operation, you must first press the
"Start" button, then follow the text prompts at the bottom of the
interface to start the foot switch and start production. If you
need to pause during automatic operation, you can press the “pause”
button or pause the foot switch, and then press “pause” or pause to
stop the pedal switch to continue running.
3.6. In this interface you can switch to manual mode, automatic
mode, file management, I/O mode, or back to home page (open machine
-- Specifications of machine
|Maximum applicable carbon steel pipe||Ø38.1*2.0t|
|Maximum applicable stainless steel pipe||Ø31.7*2.2t|
|*Maximum feeding length||2050mm|
|*Maximum coring length||2950mm|
|Feeding mode||Clamping feeding|
|*Maximum bending radius||200mm|
|Maximum bending angle||190°|
|*Settable bending angles of each pipe fitting||36|
|Main motor power||5kw|
|Maximum oil pressure||12MPa|
-- Packaging and service
1. Payment terms: 30% T/T down payment and 70% T/T before shipment.
2. Delivery time: No later than 15 days since receiving the advance
3. Validity of the price: For ONE month.
4. Package: Wooden case.
5. Warranty period: We guarantee machine quality for 12 months.
During this period, if spare parts of the machine were damaged, we
can send the component to the customer by international express
6. We can send our engineers to the customer’s factory to install
and train for using freely. The customers just need to provide the
double trip tickets, food and accommodation for our engineers. The
customer can also send your staff to our factory to learn the
operation and maintains freely.
7. Our factory provides service for customers forever, if the
customer needs operation help or technical guidance, you can
contact us by Email or telephone at any time, we provide 24 hours
-- Pictures of machine