twin tube medium wave infrared heater lamps fior textile printing
|Twin tube medium wave infrared heater|
|Operating temperature||900° C|
|Heating filament||Ni-Cr or Fe-Cr-A1|
|Response time||0.5-1 minute|
|IR wavelength||2-4 um|
|Average working life||20000 hours|
|reflector||Gold or ceramic coating|
|Max overall length||4000mm|
Construction of twin tube medium wave ir heater
Introduction of medium wave infrared heater
We manufacture and supply superior quality medium wave infrared
heater that consists of a helically wound resistance coil housed in
a pure vitreous silica fused quartz tube. The quartz tubing is
terminated with ceramic insulating caps that are specially designed
to allow the quartz tubing to breathe. The ceramic caps are tightly
fastened to the quartz tube with high temperature cement that
allows the quartz to breathe. Made of high quality material, these
are superior in performance and offer long serving life.
The filament temperature of a medium wave emitter is from 850°F and
2150°F (454°C - 1177°C). The majority of energy generated by the
medium wave lamps is in the range of the electromagnetic spectrum
between 2-4 microns.
Medium wave emissions do not penetrate as deep into substrates as
shortwave. The emissions are readily absorbed by water films,
plastics and many solvents.
Medium Wave Quartz Infrared Heaters are slower in response to
changes in process requirement as compared to the short-wavelength
lamps and are slower to heat up and cool down.
Medium Wave Quartz Infrared Heaters are excellent for surface
heating and for drying coatings paint, dyes, lacquers, adhesives
and in the processing of plastic sheet and films. They are
available in Clear or Opaque Quartz Tube with gold or ceramic
reflective coatings that focus the emitted energy onto the
Advantages of quartz tubular infrared heater
|energy saving||Infrared radiation unlike convection or conduction, dose not rely
on any medium to transfer heat from infrared source to the object
being heated, heat directly to the object|
|no need medium transferring, quick response,can reach working
temperature more quickly, heating by infrared emitters shortens
process time and increases production rates|
|cost saving||low capital cost, easy installation, reliable operation, low
maintenance costs and efficient use of energy.|
Better product quality
|Controllable, predictable heating reduces wastage and promotes
|Clean, and no any pollution released to the surroundings|
Drying of Water-Repellent Coating on Fabric
Textile Embossing and Laminating
PET preform heating in Stretch blow moulding machines
Powder coating curing
Resins Hardening, Rubber coating drying
Adhesives - End polymerization
Food - Pasteurization / Sterilization
Paper Industry - Humidity Control
Industrial Drying - Paint , Varnishes , Dyeing
Semi Conductor Industries - Heating of wafers
Printing - Printing ink drying in screen and offset machines
1. how to place the order?
Let us know your required lamp specifications including lamp
type,diameter, length, power, voltage,reflector...then we send you
quotation,after payment,production will be started, after finished,
they will be shipped to your side.
2. What is the payment term?
prepayment 100% advance via wire transfer, Paypal, Western Union
3. could you supply clamps for lamp installing ?
Yes, we will provide mounting clamps for clients, and the
corresponding clamps quantity with purchased lamps are supplied
freely bu us.
4. Have an unusual design?
Send us a drawing, sketch, or sample and we'll be happy to quote
We specialize in small runs and custom designs, but can be highly
competitive on large orders as well.
5. How does your factory do quality control
" quality is priority", we always and keep paying more attention to
QC from the material purchasing to the lamps' packing. Our product
CE, ROHS, ISO9001.