High Efficiency Closed Loop Cooling Water System For Chemical Industry

LSN-30B Industrial Water Spray Closed Type Water Cooling Tower

1. Working Principle of closed circuit cooling tower:
1, Working fluid (water, oil o other liquid) flowing inside of the coils, which is enwrapped by spray water on the outside. The heat of water is transferred by the coil and become the saturated vapor when meeting the water and air.
2, the heat is exhausted out of the tower by the tower by the top fan; water is collected back to the bottom tank and circulates continuously. The spray water is cooled down via PVC radiation fin in the process of circulation, and flow is the same direction with the fresh wind. The coil mainly takes sensible heat travel style.
3, the most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high-temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 32°C).

2. Advantage of closed circuit cooling tower:

Water-cooled cable using high-quality multi-strand copper stranded copper material, high-strength flame-retardant rubber jacket tube, cold-formed joints, contact, and strong tensile strength.

1 .Easy to maintain: the huge inside spare space is convenient for people to access to maintain the cooling tower

2.Avoiding scaling: better water coverage around the tube is due to air and spray water flowing in smooth,patallel, downward path over the coil, promoting dry spots since the water is not stripped from the underside of the tubes by the airflow.

3. Parts of Closed Type Cooling Tower:

• Coil: Made of high-quality seamless steel pipes. The coil unit are galvanized entirely to improve the corrosion resistance ability and extend the service time. The coils can also be made by SS-304/316L stainless steel or T2 red copper. Maximum pressure of our coils could reach to 32Mpa.
• Spray Pump: Sealed by top quality rotary no-limited machinery seal, no leaking, long lifecycle, small horse power, large flow volume, low noise and high performance.
• Fan: Aluminum alloy axis-flow type
• Casing: SS-304/316L or imported Aluminum-zinc alloy plate.
• Removable Drift Eliminator: PVC material; Make sure that the water loss rate will be less than 0.005%.
• Cooling Tower Fill: 100% Original Material PVC Infill, special design with great cooling effect.

4. Cooling Tower Package:

1. the body is designed to 2 parts: upper body and bottom body, can be easily divided into two parts, and loaded into container;

2. shipping with 20ft and 40ft container.

5.Related Products:

Induction Heating Machine	Induction Quenching Machine	Induction Brazing Machine	Large Melting Furnce

Zhengzhou Lanshuo Electronics Co., Ltd is located in Zhengzhou National High& New Technology and Industrial Development Zone. Our mission is to provide customers the highest quality products to gain the reputation by focusing on customer satisfaction.

15-year experience in the R&D, design, production of high frequency and medium frequency induction heating machines. Products have won great reputation among clients.

Our main products are High Frequency IGBT Induction Heating Machine and Super Audio Induction Heating Machine, CNC Quenching Machine Tool, Medium Frequency Induction Melting Furnace, KGPS Medium Frequency Induction Melting Furnace, Open type Cooling Tower, Closed Type Cooling Tower, Water Cooling Chiller, etc.

Our roducts' quality are reliable, the performance are excellence. Our equipments are widely used in the industry of melting, casting, forging, heating, heat preservation,hot rolling, brazing, annealing, quenching, hot fitting, bending before heat treatment etc.

We have exported to Pakistan, Egypt, India, Vietnam, Mexico, Uganda, Ukraine, Serbia, Russia, Germany, Turkey, South Korea, Malaysia, Philippines and other countries.

Welcome friends from all over the world to visit our factory and give valuable advice.