Hydraulic 2D CNC wire bending machine SGW-12A
1. Multifunction. Bar decoil, straighten, hydraulic cutting and
2. Process wire dia 4-12mm, can process double wire.
3. High efficiency, can finish 900-1800 PCS/H, can replace 20-30
4. CNC, touch screen, can bend 80 kinds of stirrups, easy to set
the stirrup size and shape.
Our product advantage:
1. The curve configuration can avoid steel bars'axis-level torsion
and improve the steel bar's straightening effect.
2. Two pieces of steel bars can be pressed and fastened separately
by the traction configuration to assure two pieces of steel bas
being handled simultaneously.
3. Special-designed horizontal straightening configuration can
straighten each steel bar separately, which can not only improve
the horizontal straightening effect, but also keep the two pieces
of steel bars in parallel. This will assure the steel bar's
4. Adopting fluid drive has good transmission, high efficiency and
5. All of the idler wheels are made of high-quality alloy steel,
which has good rigidity and anti-grinding characteristic. Its shelf
life is lengthened a lot.
SGW-12A CNC wire bending machine is very popular in Middle East,
Asia, Africa, South America etc.
|Traction servo motor||total power||7 KW|
|spindle speed||1800 r/min|
|Processing scope||single line||Î¦4-Î¦12 mm|
|Maximum draught speed||90-100 m/min|
|material-feeding accuracy||±1 mm|
|Processing Angle tolerance||±1°|
|Length scope||60-1200 mm|
|processing capacity||900-1800 Pic/H|
|Pressure of Hydraulic pump station||0.8-1.0 MPa|
|OTR operation temperature range||-5-50°C|
|Whole weight||2.0-2.2 ton|
|overall dimension||3700*1600*1000 mm|
|hydraulic pressure pimping station||power||7.5 KW|
|Rotate speed||1500 r/min|
|General power of equipment||15 KW|
|power consumption per hour||10°|
|Output per hour||2200 unit|