Semi Automatic Bottle Blowing Machine 8 Liters / Injection Molding
TYPE ONE: HY6L-C
(1) One cavity mold: can blow the PET bottle up to 8 liters;
(2) Two cavities mold: can blow the bottles up to 3 liters.
- Adopt the new type double bend arm and four pull rod-clamping
structure(won the patent). Cross direction; middle mould board is
move parallel;the distance between two mold board is adjusted by
the chain wheel. Thus the clamping force is very strong.
- The machine frame is produced by the whole complete casting bottom,
so that the machine is firm and running stable.
- Adopt the straight slide way, reduce the friction and lengthen the
life of the machine.
- Double start working button, which is designed for avoiding for you
- Power saving design that can increase your profits.
- The single direction of pre-form placing and bottle picking , which
increase the output.
- Sepregate type air controlling system, which is designed for
avoiding waste pollution.
- The stretching air cylinder is adjusted parallel from front to
back, from left to right freely by regulator.
Products General Specifications
|Theoretical output||450 1000|
|Max bottle volume||8(one cav) 3(two cav)|
Automatic blowing machine