Electronic potting compound for silicon rubber (Liquid)is a kind of
low viscosity, Inherent flame resistance, two components addtion
cured potting silicone with heat-conducting. It cures with both on
room temperature and heated temperature. It has the feature of the
higher temperature the faster of the curing time. It can be applied
to electronic components for insulation, waterproofing, fixed and
flame retardant. It mainly applied in electronic components surface
with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal
Electronic potting compound for silicon rubber (Liquid)could be
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation
and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB
1, Pls put part A and part B in separate container and stir evenly
before mixing the two part together.
2, Mixing Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5
minutes.Then the mixture could be used for pouring.
4, Pls note that the thickness of the silicone affects the curing
time. If the silicone used is a little thick,then the curing time
will be a little longer.The temperature also affects the curing
time.When in lower temperature, we suggest customers appropriately
heat the mixture to accelerate vulcanization. With temperature of
80~100°C, the silicone will cure in 15 minutes; while in 25°C room
temperature, the silicone will cure around 8 hours.
1.The following material may hinder the curing of Electronic
potting compound for silicon rubber (Liquid), So pls use after the
test. When necessary, pls clean the application areas.
l Organotin compound or Condensation silicone with organotin
l Sulphur, sulfide and sulfur rubber materials.
l Amine compounds as well as contains the amine materials.
l Pewters solder flux
2.Electronic potting compound for silicon rubber (Liquid) should be
sealed storage.The mixture should be used up disposably to avoid
3.Electronic potting compound for silicon rubber (Liquid) belongs
to non-dangerous goods, but keep away from mouth and eyes.
4. When it gets stratified after a period of storage, Please mix it
evenly before using,which does not affect the performance.
20Kg/pail as a set (Part A 10Kg + Part B 10Kg)
Any questions of RTV 2 silicone rubber , please feel free to
contact Ms Nancy: