Automatic Tripod Turnstile Gate Access Control
1.Reliable Performance, Low Noise
3.RS485 Standard Interface
Full Automatic Tripod Turnstile for Access Control
indoor and outdoor
≤95% no condensing
Railing angle in turn
Railing turning direction
single way and bi-direction
AC220V 50HZ input, DC24V(2000mA) direct current safe voltage drive
12V level signal or pulse width >100ms 12v pulse signal
>200mA support different kinds of signal input
standard RS485 agreement
Functions and Features
1 The equipment material is stainless steel with cold pressing and
bending technology, with no clearance weld. Beautiful design,
2 The width of stainless steel box is 2mm
3 Reliable performance, rejecting personal interference, add over
current protection, prolong the life time.
4 Connect with fingerprint, RF ID/IC card, palm print equipment,
time attendance, door access control, consumption equipment
5 The whole equipment is designed with stainless steel and water
proof. It is hard to be influenced by outside environment. The
movement of the motor has been through grinding process with low
6 The tripod turnstile has self-check function. It is can be
realize the working conditions through the indicator to debugging.
7 When the power off, the railing drop, and when the power on, hold
the railing by manual, and after reading card, it is automatically
stepping forward 15°.
8 It is reliable and don’t bounce when people pass, at the same
time, the pedestrian’s information will display, one time card
reading for one person.
9 Put the railing with sheath to prevent children or pedestrian
hurt by crashing, in the open air it can sucking water.
10 The master board has counter function, so if no body pass, it
comes back to the initial position.